A clear floor or ground space complying with Section 11B-305 shall be provided at each kitchen appliance. Clear floor or ground spaces shall be permitted to overlap....
Search Results "Wheelchair Space"
Commonly Searched Documents
- 
    
  
  11B-804.6.1 Clear floor or ground space
  
- 
    
  
  305 Clear Floor or Ground Space for Wheelchairs
  [See subsections ...] 
- 
    
  
  4.2.4* Clear Floor or Ground Space for Wheelchairs.
  [See subsections ...] 
- 
    
  
  305 Clear Floor or Ground Space for Wheelchairs
  [See subsections ...] 
- 
    
  
  4.2.4* CLEAR FLOOR OR GROUND SPACE FOR WHEELCHAIRS
  [See subsections ...] 
- 
    
  
  III-7.5180 Assembly areas
  This section specifies the number of wheelchair seating spaces and types and numbers of assistive listening systems required in assembly areas. 1) Wheelchair seating: Requirements for... 
- 
    
  
  11B-206.7.3 Incidental spaces
  Platform lifts shall be permitted to provide an accessible route to incidental spaces which are not public use spaces and which are occupied by five persons maximum.... 
- 
    
  
  2004 ADA and ABA Accessibility Guidelines
  surfaces on diagnostic equipment used by patients in a supine, prone, or side-lying position and diagnostic equipment used by patients in a seated position (see M301.2.1 and M302.2.1); • Wheelchair... 
- 
    
  
  Folding Seats on Equipment Used by Patients Seated in a Wheelchair (M302.4 Exception)
  M302.4 includes an exception for diagnostic equipment that is designed for use by patients seated in a wheelchair and provides a folding seat.... 
- 
    
  
  M303.3.3.2 Cross Slope
  The cross slope of ramp runs shall not be steeper than 1:48. 
- 
    
  
  M303.3.3 Ramped
  Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3. 
- 
    
  
  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height
  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height. Edge protection is not required on platforms 1 ½ inches or less in height. 
- 
    
  
  5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations
  5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations The Committee recommends a two-inch high edge protection on the back of the... 
- 
    
  
  5.8.1.2.1 Ramped Entry Slope
  5.8.1.2.1 Ramped Entry Slope. Raised platforms should have a ramp with slopes that do not exceed the following: Rise 0 to 1 ½ inches – 1:2 Slope Rise >1 ½ to 2 ½ inches – 1:8... 
- 
    
  
  5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides
  5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides. A minimum 2 inch high edge protection must be provided on both sides of the platform for double ramped entry... 
- 
    
  
  5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides
  5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides. A 2 inch high edge protection must be provided on the back of the platform, opposite the entry... 
- 
    
  
  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height Recommendations
  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height Recommendations The Committee recommends that no edge protection be required on platforms of 1½ inches or less... 
- 
    
  
  5.8.1.2.3 Double Ramped Entry - Edge Protection on the Platform sides Recommendations
  5.8.1.2.3 Double Ramped Entry - Edge Protection on the Platform sides Recommendations The Committee recommends a minimum two-inch high edge protection on both sides of the... 
- 
    
  
  M303.3.3.2 Cross Slope
  The cross slope of ramp runs shall not be steeper than 1:48. 
- 
    
  
  M303.3.3 Ramped
  Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3. 
- 
    
  
  M303.3.3.4 Edge Protection
  Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side. 
- 
    
  
  § 35.151(g)(3)
  (3) Facilities that have more than 5,000 seats shall provide at least five wheelchair locations that are configured to provide at least three companion seats for each wheelchair space; and... 
- 
    
  
  304 Turning Space
  Minimum spatial requirements are specified for wheelchair turning space. This section permits either a 60 inch diameter circle or a T-shaped design.... 
- 
    
  
  Section 36.406(f)(4)
  For stadium-style movie theaters, in Sec. 36.406(f)(4) of the NPRM the Department proposed requiring placement of wheelchair seating spaces and companion seats on a riser or cross-aisle... 
