Assess During the Planning, Installation and Maintenance Phases Once the playground surface is installed, an on-site inspection of the surface system should be conducted along the accessible...
Search Results "Walking Surface"
Filters
Commonly Searched Documents
-
4. Assess During the Planning, Installation and Maintenance Phases
-
Problem Three (Accessible Route)
Problem Three: One or two steps are part of the walkway leading to the accessible entrance. Solution: Install a portable ramp.
-
Question 7
YES/NO 7. Are all sidewalks and walkways to the business entrance free of any objects (e.g., overhanging trees, flags, hanging planters) with bottom...
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
-
Mirror Height
The guidelines specify that accessible mirrors be mounted so that the bottom edge of the reflecting surface is no higher than 40 inches (603.3)....
-
National Trail Surfaces Study Final Report
National Trail Surface Study Final Report February 2014 Staff Liaison Bill Botten U.S....
-
11B-606.5 Exposed pipes and surfaces
There shall be no sharp or abrasive surfaces under lavatories and sinks....
-
11B-606.5 Exposed pipes and surfaces
There shall be no sharp or abrasive surfaces under lavatories and sinks....
-
DOT Memorandum: INFORMATION: Snow Removal on Sidewalks Constructed with Federal Funding
For more information see section 4.3.1, Surface Repairs, Snow Removal, and Vegetation in the AASHTO Guide for the Planning, Design, and Operation of Pedestrian Facilities (July 2004)....
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
The surface of outdoor recreation access routes, passing spaces, and resting intervals shall be firm and stable....
-
1016.2 Surface
This section requires the surface of outdoor recreation access routes, passing spaces, and resting intervals to be firm and stable....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
4.24.6 EXPOSED PIPES AND SURFACES
There shall be no sharp or abrasive surfaces under sinks....
-
Wooster Products Anti-Slip Safety Coatings Systems
bare materials such as wood, metal, asphalt, marble, concrete, stone, and many other surfaces: Safe-Stride® will provide a durable and long wearing safety surface....
-
5.1.8 Slope
The slope of the surface of the clear ground space shall not be steeper than 1:48 (2 percent) in any direction....
-
4.24.6 Exposed Pipes and Surfaces
There shall be no sharp or abrasive surfaces under sinks....
-
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface. Exceptions: 1....
-
1.1.6
1.1.6 Accessible surfaces should be as smooth as possible....
-
Summary of Results
than the other trail segment surface materials....
