Corada

Transfer supports shall not rotate within their fittings when in place for transfer....

M305.2.2 Length (Section-by-Section Analysis)

table at the designated transfer location for at least the minimum width of the transfer surface, with a minimum length of 28 inches....

M305.2.7 Clearance (Section-by-Section Analysis)

In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support....

M305.2.2 Length

The length of transfer supports shall comply with M305.2.2.1 or M305.2.2.2....

A4.22.3 Clear Floor Space

The dotted lines designate the minimum clear floor space, depending on the direction of approach, required for wheelchair users to transfer onto the water closet....

Bobrick 18" Straight Grab Bar Peened B-6806.99 x 18

18" (455mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...

Delta 1-1/2″ x 18″ ADA Grab Bar, Concealed Mounting 40118-PS

Product Features and Benefits 18″ long, 1 1/2″ wide Concealed mounting - mounting hardware included 3″ diameter flanges 1 1/2″ wall clearance Limited Faucet and Finish...

Bobrick 18" Straight Grab Bar B-6806 x 18

18" (455mm) long, 1-1/2" (38mm)dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...

Bobrick 18" Straight Grab Bar B-5806 x 18

18" (455mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...

Bobrick 18" Straight Grab Bar Peened B-5806.99 x 18

18" (455mm) long, 1-1/4" (32mm) dia. tubing , peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...

M305.2.6 Gripping Surface

Transfer support gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....

M305.2.3 Fittings

Transfer supports shall not rotate within their fittings....

M305.2.6 Gripping Surfaces (Section-by-Section Analysis)

The proposed rule did not provide any specific requirements regarding gripping surfaces on transfer supports....

Evaluation of transfers

These types of transfers were not evaluated in our study. ...

iv. Lifts

Lifts Medical providers may need lifts to transfer some patients with mobility disabilities safely to examination or treatment tables or chairs or to gurneys or hospital beds....

M305.2.7 Clearance

Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum....

M305.2.5 Surface Hazards

Transfer supports and surfaces adjacent to transfer supports shall be free of sharp or abrasive components and shall have eased edges....

M305.2.4 Cross Section

Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2....

M305 Supports

[See subsections ...]

M305 Supports

[See subsections ...]

M305.2.4 Cross Section (Section-by-Section Analysis)

The proposed rule did not provide specific requirements for the cross section of transfer supports....