Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.
Search Results "Signage Location"
-
703.2.1 Depth
-
703.7.2 Symbols
[See subsections ...]
-
407.2.3 Hoistway Signs
Signs at elevator hoistways shall comply with 407.2.3.
-
703.2.1 Depth
703.2.1 Depth. Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.
-
703.7 Symbols of Accessibility
703.7 Symbols of Accessibility. Symbols of accessibility shall comply with 703.7.
-
407.2.3 Hoistway Signs
407.2.3 Hoistway Signs. Signs at elevator hoistways shall comply with 407.2.3.
-
11B-216.8.1 Geometric symbols
Exceptions: Geometric symbols shall not be required at entrances to toilet and bathing rooms located within private or semi-private rooms or spaces....
-
T702.4 Character Height
Table T702.4—Character Height Sign location Minimum character height Exterior route or destination signs on boarding side of non-rail...
-
11B-216.6 Entrances
Where a directional sign is required, it should be located to minimize backtracking....
-
11B-216.8.1 Geometric symbols
Geometric symbols shall not be required at entrances to toilet and bathing rooms located within private or semi-private rooms or spaces....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall. ...
-
11B-410.8 Restriction sign
3094.2(e), 2094.2(g), and 3094.2(p).These regulations address technical requirements for lifts, including platform size, gate configurations for lifts with 90-degree egress, and required signage...
-
11B-410.8 Restriction sign
These regulations address technical requirements for lifts, including platform size, gate configurations for lifts with 90-degree egress, and required signage as follows: (1) lift capacity...
-
Single User Restroom Accessibility
You note that both restrooms (located next to each other) have accessibility deficiencies that will need to be repaired to meet the requirements of both the CBC and ADA Standards. ...
-
Innerface ARQ Interior Sign Frame System
Our new and improved ARQ System is a curved sign frame system available in a variety of sizes and configurations. The extruded aluminum frame accepts a variety of insert...
-
§ 37.91 Wheelchair locations and food service on intercity rail trains
[See subsections ...]
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall. ...
-
Elevators: ADA Standard Section 216.7
Section 216.7 covers scoping requirements in the current ADA Standards for signs at elevators.
-
11B-206.4.1 Entrances
All entrances shall comply with Section 11B-404. [2010 ADA Standards] 206.4.1 Public Entrances. In addition to entrances required by 206.4.2 through 206.4.9, at least 60 percent...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter...
-
Character Height: ADA Standard Section 703.2.5
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter...
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish. Symbols of accessibility shall contrast with their background with either a light symbol on a dark...
-
11B-810.4 Bus signs
Bus route identification signs shall comply with Sections 11B-703.5.1 through 11B-703.5.4, and Sections 11B-703.5.7 and 11B-703.5.8. In addition, to the maximum extent practicable,...
-
11B-810.4 Bus signs
Bus route identification signs shall comply with Sections 11B-703.5.1 through 11B-703.5.4, and Sections 11B-703.5.7 and 11B-703.5.8. In addition, to the maximum extent practicable,...
