Factory industrial occupancy includes, among others, the use of a building or structure, or portion thereof, for assembling, disassembling, fabricating, finishing, manufacturing, packaging...
Search Results "Finish"
-
4.1.4(7) FACTORY INDUSTRIAL
-
1136A.1 Receptacle heights
more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished...
-
Salsbury Industries See Through Metal Locker
Requires the Registered User plan or above. Login! -
Toilet Paper Dispensers
inches maximum in front of the water closet measured to the centerline of the dispenser.The paper outlet of the dispenser must be located 15 inches minimum and 48 inches maximum above the finish...
-
1136A.1 Receptacle heights
more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished...
-
5.1 Transfer Surface Height Recommendations
5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...
-
203.9 Employee Work Areas
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
2. b. ii. Accessible Door Hardware
Hardware required for accessible door passage shall be mounted no higher than 48 in (1220 mm) above finished floor. xv Figure 14 and 15 (top and bottom left) Non-accessible door...
-
1136A.1 Receptacle heights
more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished...
-
Contrast and wayfinding, short-term and long-term
So along with stair safety goes finishes, just paint the stupid things. Fifty cents a square foot....
-
Covered Multifamily Dwellings
The commenter stated that basements are generally designed with the top of the basement, including the basement entrance, above finished grade, and that basement space cannot be made accessible...
-
11B-203.9 Employee workstations
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
11B-203.9 Employee workstations
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
TEST NO. 1 – INDIVIDUAL BUILDING TEST
The slopes of the planned finished grade measured between the entrance and all vehicular or pedestrian arrival points within 50 feet (15 240 mm) of the planned entrance also exceed 15 percent...
-
1136A.2 Switch and control heights
shall be located no more than 48 inches (1219 mm) measured from the top of the outlet box nor less than 15 inches (381 mm) measured from the bottom of the outlet box to the level of the finished...
-
Q2.) What are the types of “field conditions” that were anticipated where the advisory says “tolerances recognized by this provision include those for field conditions”?
And a concrete finisher clearly cannot guarantee that the slope of a concrete curb ramp will be consistently 8.33% across its entire surface. ...
-
R410.6 Character Height
Table R410.6 Visual Character Height Height to Finish Surface from Baseline of Character Horizontal Viewing Distance Minimum Character Height 1.0 m (3.3...
-
Deferred Maintenance
Schedule with completion dates for improvements that will take more than 1 year to finish....
-
TEST NO. 1 – INDIVIDUAL BUILDING TEST
The slopes of the planned finished grade measured between the entrance and all vehicular or pedestrian arrival points within 50 feet (15 240 mm) of the planned entrance also exceed 15 percent...
-
1136A.2 Switch and control heights
shall be located no more than 48 inches (1219 mm) measured from the top of the outlet box nor less than 15 inches (381 mm) measured from the bottom of the outlet box to the level of the finished...
-
1136A.2 Switch and control heights
shall be located no more than 48 inches (1219 mm) measured from the top of the outlet box nor less than 15 inches (381 mm) measured from the bottom of the outlet box to the level of the finished...
-
TEST NO. 1 – INDIVIDUAL BUILDING TEST
measured between the planned entrance and all vehicular or pedestrian arrival points within 50 feet (15 240 mm) of the planned entrance exceed 15 percent; and The slopes of the planned finished...
-
11B-233.3.1.2.6.2 Test number one, individual building test
The slopes of the planned finished grade measured between the entrance and all vehicular or pedestrian arrival points within 50 feet (15,240 mm) of the planned entrance also exceed 15 percent...
-
Building Guidelines and Standards are needed for Accommodations of Low Vision Persons
Perhaps if we look at finishes: floors, ceilings, color, value, contrast, furniture and arrangement and configurations of spaces, we can actually read and understand some of these spaces...
