Pedestrian access routes shall consist of one or more of the following components: 1....
Search Results "9-1-1 Service"
-
R302.2 Components
-
903.3.1.1.1 Exempt locations
spaces or areas are equipped throughout with an automatic fire alarm system and are separated from the remainder of the building by a wall with a fire-resistance rating of not less than 1...
-
105.2.5 NFPA
Copies of the referenced standards may be obtained from the National Fire Protection Association, 1 Batterymarch Park, Quincy, Massachusetts 02169-7471, (http://www.nfpa.org)....
-
Responsibilities of Employees other than the CRO
[Sec. 382.61(a)(1)] These employees must receive training regarding awareness about and appropriate responses to individuals with physical, sensory, mental, and emotional disabilities....
-
Wheelchairs
[Sec. 382.41(e)(1)] • If the aircraft contains a closet or storage area of a size sufficient to accommodate a passenger’s folding, collapsible, or breakdown wheelchair, the carrier must...
-
11B-405.5 Clear width
Exceptions: 1. ...
-
T503 Passenger Access Routes
.”), 1192.159(a)(1) (establishing same requirement for OTRBs)....
-
Managed Use
A mode of travel that is actively managed and appropriate on a trail, based on its design and management. 1....
-
Documenting Exceptions and Notifying the U.S. Access Board About Exemptions
Access Board About Exemptions When a condition for an exception prohibits full compliance with a specific technical requirement on a section of trail as allowed in General Exception 1, document...
-
Typical Issues
Accessible Passenger Drop-off and Loading Area Notes: 1. Access aisle depth is at least 5 feet. 2. Access aisle length is at least 20 feet. 3....
-
A4.2.1(3) Space Requirements for Passing
Able-bodied people in winter clothing, walking straight ahead with arms swinging, need 32 in (815 mm) of width, which includes 2 in (50 mm) on either side for sway, and another 1 in (25...
-
1.1 Conditions for an Exception
Condition for an Exception 1. Where compliance with the technical provision is not practicable due to terrain. Condition for an Exception 2....
-
§1630.2(j)(3)(iii)
(iii) For example, applying the principles set forth in paragraphs (j)(1)(i) through (ix) of this section, it should easily be concluded that the following types of impairments will, at...
-
Model Building Codes and Industry Standards
The IBC contains application and scoping provisions for accessibility (in chapters 10, 11 and 34) that correspond to those in the ADA guidelines (chapters 1 and 2)....
-
1.1.14 Flatness of ramp cross slope
In addition to the measurement locations in 1.1.14, if a portion of the ramp appears to be steeper than 1:48 (approximately 2%) measure at that location as well....
-
Paragraph (e) (Advisory Guidance)
Paragraph (e) TTY Signal Compatibility 1....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: 1....
-
11B-903.4 Back support
Back support shall be 2 1/2 inches maximum from the rear edge of the seat measured horizontally. [2010 ADAS] Advisory 903.4 Back Support....
-
[A] 111.2 Certificate issued
ETA Editor's Note The remainder of California Building Code Chapter 1, is not adopted by the Division of the State Architect - Access Compliance (DSA-AC), has been omitted....
-
II-2.1000 General
Title II protects three categories of individuals with disabilities: 1) Individuals who have a physical or mental impairment that substantially limits one or more major life activities...
-
11B-903.4 Back support
Back support shall be 2 1/2 inches maximum from the rear edge of the seat measured horizontally. Advisory 11B-903.4 Back support....
-
111.2 Certificate issued
ETA Editor's Note The remainder of California Building Code Chapter 1 is not adopted by Division of the State Architect - Access Compliance (DSA-AC), has been omitted....
-
§1607.7 Use of other validity studies.
conducted by one test user, or described in test manuals and the professional literature, will be considered acceptable for use by another user when the following requirements are met: (1)...
-
15. When may an employer refuse to hire, terminate, or temporarily restrict the duties of a person who has or had a hearing impairment because of safety concerns?
The employer also must consider: (1) the duration of the risk; (2) the nature and severity of the potential harm; (3) the likelihood that the potential harm will occur; and...