Substantial impairment means a significant loss of the integrity of finished materials, design quality, or special character resulting from a permanent alteration....
Search Results "Non-Glare Finish"
-
§8.3 Substantial impairment
-
407.4.6.4.1 Height
Emergency control buttons shall have their centerlines 35 inches (890 mm) minimum above the finish floor....
-
4.32.4* Height of Tables or Counters
The tops of accessible tables and counters shall be from 28 in to 34 in (710 mm to 865 mm) above the finish floor or ground....
-
Height
The models were installed at 39 inches above finished floor to the base....
-
11B-602.4 Spout height
Spout outlets shall be 36 inches (914 mm) maximum above the finish floor or ground....
-
Section 37.133 Subscription Service
The one exception to this rule would occur in a situation in which there is excess non-subscription capacity available....
-
11B-803.5 Coat hooks and shelves
Shelves shall be 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor or ground....
-
604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat....
-
604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat....
-
404.2.11 Vision Lights
or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel located 43 inches (1090 mm) maximum above the finish...
-
604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat....
-
604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat....
-
11B-803.5 Coat hooks and shelves
Shelves shall be 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor or ground....
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
What materials may satisfy ADAAG requirements?
These finishes, tested during the Access Board research project, yielded coefficients of friction that fell within the recommended ranges for accessible routes....
-
R402 Protruding Objects (Section-by-Section Analysis)
R402 Protruding Objects (Section-by-Section Analysis) Objects with leading edges between 685 millimeters (2.25 feet) and 2 meters (6.7 feet) above the finish surface must not protrude...
-
11B-606.2 Clear floor space
floor extends under the cabinetry; and (c) the walls behind and surrounding the cabinetry are finished. 4. ...
-
11B-606.2 Clear floor space
floor extends under the cabinetry; and (c) the walls behind and surrounding the cabinetry are finished. 4....
-
11B-606.2 Clear floor space
floor extends under the cabinetry; and (c) the walls behind and surrounding the cabinetry are finished. 4....
-
T303.1 General
Handrails, stanchions, and handholds in non-rail vehicles shall comply with T303....
-
T210.1 General
Non-rail vehicles shall provide wheelchair spaces in accordance with T210....
-
T704.1 General
Non-rail vehicles shall provide announcement systems in accordance with T704....
-
T505.1 General
Fare collection devices in non-rail vehicles shall comply with T505....
-
412.8.1 TTY Connectability
ICT shall include a standard non-acoustic connection point for TTYs....