Satin stainless steel. Support-arm flanges lock to concealed stainless steel wall plate. Chrome-plated plastic spindle holds rolls up to 5 1⁄2" (140mm) diameter (1800 sheets).Unit 12...
Search Results "Multi-User Toilet Room"
Filters
Commonly Searched Documents
-
Bobrick Surface-Mounted Toilet Tissue Dispenser B-6867
-
Bobrick Surface-Mounted Toilet Tissue Dispenser B-685
Bright-polished stainless steel. Support-arm flanges lock to concealed stainless steel wall plate. Chrome-plated plastic spindle holds rolls up to 5 1⁄2" (140mm) diameter (1800...
-
Location: ADA Standard Section 604.9.1
Section 604.9.1 covers the current ADA Standards for the mounting location of children's use water closets.
-
11B-604.9.1 Location
the side wall or partition, except that the water closet shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum from the side wall or partition in the ambulatory accessible toilet...
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
Toilet Rooms....
-
Exterior Spaces: ADA Standard Section 806.2.2
Exterior spaces, including patios, terraces and balconies, that serve the guest room shall be accessible. [S.H. 9.2.2(6)(d)]...
-
4.35.3 Doors
All doors to accessible dressing rooms shall be in compliance with section 4.13....
-
Mega Jailhouse Anti-Ligature Toilet Paper Holder With Concealed Mount Behind Wall Access Required
Description: This anti-ligature toilet paper holder is fabricated with one-piece construction and consists of a stainless steel rod with a pivoting ball joint that releases under excessive...
-
4.17 Toilet Stalls
[See subsections ...]
-
A4.17 Toilet Stalls
[See subsections ...]
-
4.17 TOILET STALLS
[See subsections ...]
-
A4.17 TOILET STALLS
[See subsections ...]
-
Sec.36.403(f) Disproportionality
(f) Disproportionality.
-
F216 Signs
[See subsections ...]
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
11B-703 SIGNS
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...
-
Mounting Height and Location
Section 703.4 covers the mounting height and location of signs with tactile characters. Such signs are to be mounted so that the tactile elements (raised characters and braille) are...
-
703 Signs
[See subsections ...]
-
703 Signs
[See subsections ...]
-
216 Signs
[See subsections ...]
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
VI. Interior Signs...
[See subsections ...]
-
216 Signs
216 Signs
