Size: 13 3/16" length, projects 3 13/32" from wall. Mounting hardware included. Finish: Satin Stainless Steel....
Search Results "Hose Length"
-
Mockett PTH1-SSS 13-3/16" Paper Towel Holder
-
American Specialties Automatic Recessed Roll Towel Dispenser and Waste Receptacle 046921A
Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8" or 9" (205 or 230 mm) wide, 800' (244 m) long rolls. 14 gal. (53 L) waste receptacle....
-
11B-805.4.3 Turning space
Refer to the following examples: Exam room - Exam rooms are required to provide a turning space, accessible handwashing fixture, and 36-inch wide access along the full length...
-
Definitions of residential facilities and transient lodging. (Section-by-Section Analysis)
including "primarily long-term" and "primarily short-term" in the respective definitions creates confusion when applied to the listed facilities because they serve people for widely varying lengths...
-
Definitions of residential facilities and transient lodging. (Section-by-Section Analysis)
"primarily long-term" and "primarily short-term" in the respective definitions creates confusion when applied to the listed facilities because they serve individuals for widely varying lengths...
-
Recommended Objective Test Method and Performance Specifications
Surfaces that are firm, but only moderately stable should be allowed on linear trails less than 0.5 mile in length (i.e., do not require a lot of turning or pivoting)....
-
11B-604.5.2 Rear wall
The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (914 mm) minimum due to the...
-
11B-604.5.2 Rear wall
Exceptions: The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (914 mm...
-
Bobrick Extra-Heavy-Duty Surface-Mounted Towel Bar B-530 x 24
24" length (610mm) bar. For use in hospital and hotel bathrooms. 1" (25mm) diameter bar is 18-gauge (1.2mm), type 304 stainless steel, satin finish. Mounting with snap flange....
-
Bobrick Extra-Heavy-Duty Surface-Mounted Towel Bar B-530 x 18
18" length (455mm) bar. For use in hospital and hotel bathrooms. 1" (25mm) diameter bar is 18-gauge (1.2mm), type 304 stainless steel, satin finish. Mounting with snap flange....
-
2. Standing
"[T]hose who seek to invoke the jurisdiction of the federal courts must satisfy the threshold requirement imposed by Article III of the Constitution by alleging an actual case or controversy...
-
Gamco Semi-Recessed Towel Dispenser - TD-4F
Door mounted on full length stainless steel piano-hinge and provided with tumbler lock. All welded construction. Capacity: 350 C-fold or 475 multi-fold towel. ...
-
American Specialties Automatic Roll Paper Towel Dispenser and Waste Receptacle 94696A
Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8" or 9" (205 or 230 mm) wide, 800' (244 m) long rolls. 10 gal. (37.8 L) stainless steel waste receptacle....
-
Service Counters
A 30”x48” clear space is required immediately adjacent to the counter length for a parallel approach (A forward approach option is also available in 11B-904.4.2)....
-
Bobrick ConturaSeries Surface-Mounted Sanitary Napkin Disposal B-270
Cover is drawn, one-piece construction; secured to cabinet with full-length stainless steel piano-hinge. Capacity: 1.0-gal. (3.8-L)....
-
1. Face-to-Face Communications
Consider how important the communication is, how many people are involved, the length of the communication anticipated, and the context....
-
604.5 Grab Bars
Reinforcement must be sufficient to permit the installation of rear and side wall grab bars that fully meet all accessibility requirements including, but not limited to, required length,...
-
F205.1 General
Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with 309. 4....
-
Step 4: Calculate Cumulative Deviation Percentage
If these deviations occur on 15 percent or more of the total trail length, FSTAG doesn't apply to the trail. Figure 146 shows step 4....
-
Passing Spaces on Trails
than 60 inches (1,525 millimeters), provide passing spaces at least every 1,000 feet (300 meters) and at the end of any segment of trail that meets the technical requirements, if the full length...
-
Master Bedroom
Lighting and shade controls to reset circadian rhythm Carpet to increase mean gait speed, step length, walking confidence. ...
-
4.1.2 Number of Wheelchair Seating Spaces
Number of Wheelchair Seating Spaces Table Top Perimeter Typical Table Length (for 2 ft. 6 in. table width) Number of Wheelchair Seating Spaces Required Up...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Manual Wheelchair
These dimensions are: (A) occupied width, the horizontal distance between the side-most (lateral-most) points of the wheelchair or occupant on the right and left side; (B) occupied length...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Scooter
These dimensions are: (A) occupied width, the horizontal distance between the side-most (lateral-most) points of the wheelchair or occupant on the right and left side; (B) occupied length...
