Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951....
Search Results "Compliance"
Filters
Commonly Searched Documents
-
1008.2.6.1 Accessibility
-
1008.2.6.1 Accessibility
Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951....
-
§104.34(c) Comparable facilities
If a recipient, in compliance with paragraph (a) of this section, operates a facility that is identifiable as being for handicapped persons, the recipient shall ensure that the facility...
-
12186(c) Consistency with ATBCB guidelines
regulations issued under subsections (a) and (b) of this section shall be consistent with the minimum guidelines and requirements issued by the Architectural and Transportation Barriers Compliance...
-
§35.190(a)
(a) The Assistant Attorney General shall coordinate the compliance activities of Federal agencies with respect to State and local government components, and shall provide policy guidance...
-
E101.1 Purpose (Section-by-Section Analysis)
Compliance with these requirements is mandatory for federal agencies subject to Section 508....
-
4.1.7(3)(d)
Access shall be provided to all levels of a building or facility in compliance with 4.1 whenever practical....
-
4.1.7(2)(d)
Access should be provided to all levels of a building or facility in compliance with 4.1 whenever practical....
-
29.
The ADA Compliance Officer and each on-site ADA Contact Person referenced in Paragraphs 27 and 28 above shall receive the required ADA training no later than 90 days after appointment, and...
-
§ 35.190(a)
(a) The Assistant Attorney General shall coordinate the compliance activities of Federal agencies with respect to State and local government components, and shall provide policy guidance...
-
11B-226.3 Dining surfaces exceeding 34 inches in height
Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be provided in compliance...
-
M201.2 General Exception (Section-by-Section Analysis)
In response, the Access Board has added a new provision excepting diagnostic equipment from compliance with an applicable requirement in the MDE Standards in the rare circumstance where...
-
Registered Accessibility Specialist (RAS) Bulletin RAS 2014-04 Signs - Exit Doors
However, a RAS has no authority to require compliance with TAS 216.4.1 based on RAS Bulletin 2012-01 since a referenced standard (ICC/IBC) dictates the location of exit passageway, exit...
-
What does "accessible" mean?
The term "accessible" means in compliance with the accessibility guidelines....
-
PLANNING FOR SUCCESS
PLANNING FOR SUCCESS __________________________________________________________________________________________________ Being proactive is the best way to ensure ADA compliance....
-
1.9.1.1.2
public accommodations should be aware that readily achievable barrier removal is an ongoing obligation under the ADA and may require physical alterations to the building or facility in compliance...
-
Alterations
Maintenance not affecting the usability of spaces, such as repainting existing striping or repairing potholes, does not trigger compliance....
-
Accessible Exterior Surfaces Technical Article
Architectural and Transportation Barriers Compliance Board Washington, DC Contract # QA96005001 21 June 1999 This material is based upon work supported by the U.S....
-
State or Local Code Certification
Certification facilitates compliance by ensuring that state and local code requirements are consistent with the ADA accessible design requirements....
-
1.9.1.1.2
public accommodations should be aware that readily achievable barrier removal is an ongoing obligation under the ADA and may require physical alterations to the building or facility in compliance...
-
11B-1009.2.1 Pool lift location
Where the entire pool depth is less than 36 inches (914 mm) or greater than 48 inches (1219 mm), compliance with Section 11B-1009.2.1 shall not be required. [2010 ADA Standards] 1. ...
-
1.9.1.1.2
public accommodations should be aware that readily achievable barrier removal is an ongoing obligation under the ADA and may require physical alterations to the building or facility in compliance...
-
2. General Framework of Assessment
Developing baseline compliance costs: Estimates of “baseline” compliance costs to covered entities under the existing 508 Standards and 255 Guidelines are drawn from current spending levels...
-
12206(d)(2) Dissemination of information
designed to ensure wide dissemination of information about the rights and duties established by this Act and to provide information and technical assistance about techniques for effective compliance...