Ramps without level landings at changes in direction typically will not meet the Standards due to resulting compound slopes....
Search Results "Ramp Landing"
Filters
Commonly Searched Documents
-
Are curved or circular ramps allowed?
-
11B-406.5.3 Landings
Landings shall be provided at the tops of curb ramps and blended transitions. The landing clear length shall be 48 inches (1219 mm) minimum....
-
11B-406.5.3 Landings
Landings shall be provided at the tops of curb ramps and blended transitions. The landing clear length shall be 48 inches (1219 mm) minimum....
-
11B-406.5.3 Landings
Landings shall be provided at the tops of curb ramps and blended transitions. The landing clear length shall be 48 inches (1219 mm) minimum....
-
Why is a top landing required at curb ramps if side flares are provided?
A landing at least 36” long at the top of curb ramps provides room to approach or exit ramps and turn without encountering compound slopes of flared sides....
-
405.10 Wet Conditions
Landings subject to wet conditions shall be designed to prevent the accumulation of water....
-
405.10 Wet Conditions
Landings subject to wet conditions shall be designed to prevent the accumulation of water....
-
405.10 Wet Conditions
Landings subject to wet conditions shall be designed to prevent the accumulation of water....
-
Obstructions [4.7.8]
At curb ramps, a landing provides the necessary connection to an accessible route. A landing with a minimum length of 48 inches will provide sufficient turning space....
-
405.10 Wet Conditions
Landings subject to wet conditions shall be designed to prevent the accumulation of water....
-
f-iv
Does the ramp have a level landing at the top and bottom of each ramp section that is at least 60 inches long?...
-
406.4 Landings
406.4 Landings. Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum....
-
406.4 Landings
Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum....
-
406.4 Landings
Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum....
-
Diagonal Curb Ramps [4.7.10]
A landing at least 48 inches long must be provided outside the through-travel lanes if a diagonal ramp is used. Otherwise, perpendicular curb ramps should be used....
-
4.8.7 Edge Protection
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
4.8.7 EDGE PROTECTION
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
a) Curb Ramps
a) Curb Ramps 48....
-
Doorways at Landings [§405.7.5]
Doorways at Landings [§405.7.5] Required door maneuvering clearances can overlap ramp landings (it is advisable to locate the swing of doors outside ramp landings for greater safety)....
-
Edge Protection [§405.9]
Edge Protection [§405.9] Edge protection along ramp runs and landings keep wheelchair casters and crutch tips on the surface and can be provided by curbs, barriers, or extended surfaces...
-
11B-410.7 Landing size
The minimum size of landings at platform lifts shall be 60 inches by 60 inches (1524 mm by 1524 mm)....
-
Sides of Curb Ramps
Commenters advised that landings should be specified at the top of curb ramps. Response....
-
Sides of Curb Ramps [§406.3]
Sides of Curb Ramps [§406.3] Curb ramps can have returned sides, but a top landing is required under all conditions to allow maneuvering to and from the run....
-
Ramp Requirements [§405]
Ramp Requirements [§405]...