Rail station signs shall comply with Section 11B-810.6....
Search Results "Rail Crossing"
Filters
Commonly Searched Documents
-
11B-810.6 Rail station signs
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
Handrail Gripping Surfaces: ADA Standard Section 1008.2.5.3.1
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
Marked Crossing
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
810.5 Rail Platforms
810.5 Rail Platforms. Rail platforms shall comply with 810.5....
-
R409.7 Cross Section
R409.7 Cross Section. Handrail gripping surfaces shall have a cross section complying with R409.7.1 or R409.7.2....
-
609.2 Cross Section
609.2 Cross Section. Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
Section 37.83 Remanufacture of Rail Vehicles and Purchase or Lease of Remanufactured Rail Vehicles by Public Entities Operating Rapid or Light Rail System
Section 37.83 Remanufacture of Rail Vehicles and Purchase or Lease of Remanufactured Rail Vehicles by Public Entities Operating Rapid or Light Rail System This section parallels the remanufacturing...
-
§ 37.131(a)(2) Rail
(2) Rail....
-
810.5 Rail Platforms
Rail platforms shall comply with 810.5....
-
810.5 Rail Platforms
Rail platforms shall comply with 810.5....
-
Circular Cross Section: ADA Standard Section 505.7.1
Section 505.7.1 covers the current ADA Standards for the circular cross section of handrail gripping surfaces.
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....
-
609.2 Cross Section
Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
609.2 Cross Section
Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
609.2 Cross Section
Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
R306 Pedestrian Street Crossings (Section-by-Section Analysis)
R306 Pedestrian Street Crossings (Section-by-Section Analysis) The technical requirements in R306 address pedestrian signal phase timing and pedestrian street crossings at roundabouts...
-
§ 37.3 High speed rail
High speed rail means a rail service having the characteristics of intercity rail service which operates primarily on a dedicated guideway or track not used, for the most part, by freight...
-
Section 37.79 Purchase or Lease of New Rail Vehicles by Public Entities Operating Rapid or Light Rail Systems
Section 37.79 Purchase or Lease of New Rail Vehicles by Public Entities Operating Rapid or Light Rail Systems This section echoes the requirement of §37.71—all new rail cars must be accessible...
-
Section 37.81 Purchase or Lease of Used Rail Vehicles by Public Entities Operating Rapid or Light Rail Systems
Section 37.81 Purchase or Lease of Used Rail Vehicles by Public Entities Operating Rapid or Light Rail Systems This section lays out the requirements for a public entity acquiring a used...
-
T303.3.1 Seat-Back Handhold Cross Section
The cross section of seat-back handholds shall have an outside diameter of 7/8 inches (22 mm) minimum and 2 inches (50 mm) maximum....
-
R206 Pedestrian Street Crossings (Section-by-Section Analysis)
R206 Pedestrian Street Crossings (Section-by-Section Analysis) Pedestrian street crossings must comply with technical requirements in Chapter R3 that reference MUTCD standards for pedestrian...