For instance, Guth, et al. (3) have shown that blind pedestrians require about 3 more seconds than sighted pedestrians to detect naturally occurring gaps in traffic, and that this requirement...
Search Results "Flangeway Gap"
Filters
Commonly Searched Documents
-
BACKGROUND
-
Gratings [4.5.4]
Recommendation: ADAAG does not specifically address other types of openings or gaps in ground or floor surfaces, such as those between pavers or at expansion joints....
-
Openings in Trail Surfaces
Openings are gaps in the surface of a trail. Gaps include slots in a drainage grate and spaces between the planks on a puncheon, bridge, or boardwalk....
-
§ 38.93(d)(2) Exception
At key stations, the horizontal gap between at least one accessible door of each such vehicle and the platform shall be no greater than 3 inches....
-
Inpro Corporation IPC® 1000 Handrail
Features & Benefits The 1000 handrail’s innovative style fills the size gap between small handrails that offer no wall protection and large handrails that provide more protection...
-
1k
Is the gap between the wall and the inside face of each grab bar exactly 1 1/2" to accommodate persons with disabilities who rest their forearms on the bars for stabilization so the arm...
-
Station 4-Acceleration
Practitioners use acceleration rates to calculate gap acceptance and the necessary intersection sight distance....
-
§ 38.113(d)(3) Exception
Where platform set-backs do not allow the horizontal gap or vertical alignment specified in paragraph (d) (1) or (2), platform or portable lifts complying with §38.125(b) of this part, or...
-
Side guard protocol
When a gap was introduced with the side guard 60 subjects were able to attain this transfer. 41% (46/113), CI[34%,52%] were able to transfer at a height level with their WMD and a gap of...
-
§ 38.83(c)(6)(i) Requirement
plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading or unloading a heavy power mobility aid and that any gaps...
-
§ 38.125(c)(6)(i) Requirement
plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading or unloading a heavy power mobility aid and that any gaps...
-
§ 38.95(c)(6)(i) Requirement
plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading or unloading a heavy power mobility aid and that any gaps...
-
Engineered Surfaces
The board configurations resulted in gaps of 0in, 0.8in, 1.25in, 1.55in and 2.00in....
-
1.1.5 Flatness of walk running slope
Measure the distance between the straightedge and the surface at the largest gap. See Fig. 1(a)....
-
R308.1.2.1 Platform and Vehicle Floor Coordination
of Transportation regulations (49 CFR parts 37 and 38) require the height of the vehicle floor and the station platform to be coordinated so as to minimize the vertical and horizontal gaps...
-
Context
The tracks provided context for the train but a steamboat floating in a gap between the railroad tracks didn’t adequately convey the change in transportation modes. ...
-
§ 38.93(d)(3) Exception
Where platform set-backs do not allow the horizontal gap or vertical alignment specified in paragraph (d)(1) or (d)(2) of this section, car, platform or portable lifts complying with §38.95...
-
Issue 4: Based on available references, can we develop “viable” design standards and guidelines”?
A “Gap Analysis” may be an immediate task....
-
§ 38.73(d)(1) Requirements
The design of level-entry vehicles shall be coordinated with the boarding platform or mini-high platform design so that the horizontal gap between a vehicle at rest and the platform shall...
-
§ 38.93(d)(1) Requirements
Cars operating in stations with high platforms, or mini-high platforms, shall be coordinated with the boarding platform design such that the horizontal gap between a car at rest and the...
-
§ 38.113(d)(1) Requirements
Cars which provide level-boarding in stations with high platforms shall be coordinated with the boarding platform or mini-high platform design such that the horizontal gap between a car...
-
INFORMATION REQUIREMENTS OF PEDESTRIANS WITH VISION DISABILITIES
the accessibility of roundabouts depends on meeting a large number of information requirements, this report focuses only on requirements related to the availability and detectability of gaps...
-
11. May an employer require an individual with a disability to accept a reasonable accommodation that s/he does not want?
The Gap, Inc., 84 F.3d 797, 801, 5 AD Cas. (BNA) 924, 927 (6th Cir. 1996)....
-
§ 38.53(d)(1) Requirements
Where new vehicles will operate in new stations, the design of vehicles shall be coordinated with the boarding platform design such that the horizontal gap between each vehicle door at rest...
