Search Results "Finish"

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  R410.7 Height from Finish Surface

  R410.7 Height from Finish Surface. Visual characters shall be 1.0 m (3.25 ft) minimum above the finish surface....

• Additional Access Publications > Proceedings of: Workshop on Improving Building Design for Persons with Low Vision
  Pricilla Rogers, Ph.D., Center on Vision Loss, American Foundation for the Blind

  Introduction What Our Laws and Regulations Do Not Say About Low Vision and the Built Environment (slides 1 and 2). Low vision poses special issues for planners (and...

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-812.8.6 Finish and size

  Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2).

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-502.6.1 Finish and size

  Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2).

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-502.6.1 Finish and size

  Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2).

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-812.8.6 Finish and size

  Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2).

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  703.4.1 Height above Finish Floor or Ground

  703.4.1 Height above Finish Floor or Ground....

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  703.4.1 Height above Finish Floor or Ground

  Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  703.5.6 Height from Finish Floor or Ground

  703.5.6 Height from Finish Floor or Ground. Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-703.4.1 Height above finish floor or ground

  11B-703.4.1 Height above finish floor or ground....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-703.4.1 Height above finish floor or ground

  mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised characters...

• Additional Access Publications > Emergency Evacuation Planning Guide For People with Disabilities
  703.4.1 Height Above Finish Floor or Ground

  Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  703.4.1 Height Above Finish Floor or Ground

  Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-703.4.1 Height above finish floor or ground

  mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised characters...

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  703.5.6 Height from Finish Floor or Ground

  Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  703.5.6 Height From Finish Floor or Ground

  Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....

• Additional Access Publications > Emergency Evacuation Planning Guide For People with Disabilities
  703.5.6 Height From Finish Floor or Ground

  Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-703.5.6 Height from finish floor or ground

  11B-703.5.6 Height from finish floor or ground. Visual characters shall be 40 inches (1016 mm) minimum above the finish floor or ground. Exceptions: 1....

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-703.5.6 Height from finish floor or ground

  Visual characters shall be 40 inches (1016 mm) minimum above the finish floor or ground....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-703.5.6 Height from finish floor or ground

  Visual characters shall be 40 inches (1016 mm) minimum above the finish floor or ground. Exceptions: 1.     ...

• Products and Additional Resources > Products
  McGuire Manufacturing Co., Inc. Heavy Finish Offset Lavatory Strainer
  

  PVD chrome finish. ADA compliant. 8 3/4" x 5 1/8" OD....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-502.6.1 Finish and size

  Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2).

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-502.6.1 Finish and size

  Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2).

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-812.8.6 Finish and size

  Identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2).