Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
Search Results "Cross-Aisle"
Filters
Commonly Searched Documents
-
11B-1008.2.5.3.1 Handrail gripping surfaces
-
Marked Crossing
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
R409.7 Cross Section
R409.7 Cross Section. Handrail gripping surfaces shall have a cross section complying with R409.7.1 or R409.7.2....
-
609.2 Cross Section
609.2 Cross Section. Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
Marking: ADA Standard Section 503.3.3
Section 503.3.3 covers the current ADA Standards for marking access aisles at passenger loading zones.
-
Irwin Seating Company ADA Swing-Away Aisle Panels
Many aisle end panels can be manufactured to swing open to allow an individual to transfer between a wheelchair and the theatre chair....
-
Do accessible routes that cross vehicular ways need to be marked as a crossing?
No, accessible routes that cross vehicular ways are not required by the Standards to be marked as a crossing....
-
609.2 Cross Section
Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
609.2 Cross Section
Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
609.2 Cross Section
Grab bars shall have a cross section complying with 609.2.1 or 609.2.2....
-
R306 Pedestrian Street Crossings (Section-by-Section Analysis)
R306 Pedestrian Street Crossings (Section-by-Section Analysis) The technical requirements in R306 address pedestrian signal phase timing and pedestrian street crossings at roundabouts...
-
T303.3.1 Seat-Back Handhold Cross Section
The cross section of seat-back handholds shall have an outside diameter of 7/8 inches (22 mm) minimum and 2 inches (50 mm) maximum....
-
R206 Pedestrian Street Crossings (Section-by-Section Analysis)
R206 Pedestrian Street Crossings (Section-by-Section Analysis) Pedestrian street crossings must comply with technical requirements in Chapter R3 that reference MUTCD standards for pedestrian...
-
11B-609.2 Cross section
11B-609.2 Cross section. Grab bars shall have a cross section complying with Section 11B-609.2.1 or 11B-609.2.2....
-
R302.5.1 Pedestrian Street Crossings
R302.5.1 Pedestrian Street Crossings....
-
11B-705.1.2.7 Track crossings
11B-705.1.2.7 Track crossings....
-
4.7.9 Location at Marked Crossings
Curb ramps at marked crossings shall be wholly contained within the markings, excluding any flared sides (see Fig. 15). ...
-
4.7.9 LOCATION AT MARKED CROSSINGS
Curb ramps at marked crossings shall be wholly contained within the markings, excluding any flared sides (see Fig. 15). Figure 15 Curb Ramps at Marked Crossings...
-
T303.3.2 Handrail and Stanchion Circular Cross Section
Handrails and stanchions with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (50 mm) maximum....
-
406.5 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served...
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-502.3 Access aisle
Access aisles serving parking spaces shall comply with Section 11B-502.3. Access aisles shall adjoin an accessible route....
-
Cross Slope
The slope that is perpendicular to the direction of travel (see running slope).
