902.3 Height. The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
Search Results "Counter Height"
Filters
Commonly Searched Documents
-
902.3 Height
-
7.3(2)
(2) Clear aisle width for accessible check-out aisles shall comply with 4.2.1 and maximum adjoining counter height shall not exceed 38 in (965 mm) above the finish floor....
-
Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?
A1.) The consistent technical assistance on this question has been that both are subject to tolerances.
-
227.3 Counters
227.3 Counters. Where provided, at least one of each type of sales counter and service counter shall comply with 904.4....
-
F227.3 Counters
Where provided, at least one of each type of sales counter and service counter shall comply with 904.4....
-
227.3 Counters
Where provided, at least one of each type of sales counter and service counter shall comply with 904.4....
-
227 and 904 Sales and Service
[See subsections ...]
-
R212.5 Counters
R212.5 Counters. Counters shall comply with section 904 of Appendix D to 36 CFR part 1191....
-
11B-231.4.1 Cubicles and counters
Where counters are provided, at least one shall comply with Section 11B-904.4.2 on both the visitor and detainee sides....
-
III. CONCLUSION
For the foregoing reasons, neither Section 904.4.1 nor its exception requires clear counter space at sales and service counters subject to the ADA’s requirements....
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
General: ADA Standard Section 227.1
Section 227.1: General Scoping Requirements for sales and service.
-
11B-227.1 General
Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with Sections 11B-227 and 11B-904....
-
1133A.4.1, Item 1
Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm)....
-
1133A.4.1, Item 1
Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm)....
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-227.3 Counters
Where provided, at least one of each type of sales counter and service counter shall comply with Section 11B-904.4....
-
11B-227.3 Counters
Where provided, at least one of each type of sales counter and service counter shall comply with Section 11B-904.4....
-
11B-227.3 Counters
Where provided, at least one of each type of sales counter and service counter shall comply with Section 11B-904.4....
-
General: ADA Standard Section 904.1
Check-out aisles and sales and service counters shall comply with the applicable requirements of 904....
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....