The National Highway Traffic Safety Administration’s (NHTSA) motor vehicle safety regulations require that a wheelchair lift be tested to withstand a 600-pound load....
Search Results "Local Requirement"
-
If the manufacturer states that the design load is 800 pounds, can the transportation operator limit actual use to 600 pounds for safety reasons?
-
Section 4. Application of the Guidelines
Section 4 also clarifies that the Guidelines, are "recommended" for designing dwellings that comply with the requirements of the Fair Housing Amendments Act of 1988....
-
216.12 Amusement Rides
Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces...
-
302.1 General
Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2....
-
1005.3 Edge Protection
Edge protection is required only where railings, guards, or handrails are provided on a fishing pier or platform....
-
504.2 Content Creation or Editing (Section-by-Section Analysis)
504.2 Content Creation or Editing (Section-by-Section Analysis) This section proposes to require authoring tools to include at least one mode of operation for creating or editing content...
-
Locks and Security Devices
(However, locks at store front gates and other security devices used only by employees in job-related tasks are not required to comply.)...
-
Platform Size and Surface
Platform Size and Surface To be part of an accessible route, lift platforms must provide the amount of clear space required for wheelchairs in ADAAG 4.2.4....
-
4.1.6(1)(j) EXCEPTION
Means, with respect to an alteration of a building or a facility, that it has little likelihood of being accomplished because existing structural conditions would require removing or altering...
-
Natural Resource Manager
It is an annual national requirement that this information be kept up to date....
-
Constructed Features in Recreation Sites
All new constructed features at Forest Service recreation sites must meet accessibility requirements....
-
1013.2 Clear Ground Space
This section requires a clear ground space 4 feet wide minimum to be provided on all usable sides of tent pads and tent platforms to enable individuals who use wheeled mobility devices to...
-
Horizontal Alignment
For example, using the 85th percentile stopping distance, the minimum offset required for a 15.8-m (50-ft) radius curve would be 3.4 m (11 ft)....
-
§100.205(e)(2)(v) 2003 International Building Code (IBC)
) 2003 International Building Code (IBC), if adopted without modification and without waiver of any of the provisions intended to address the Fair Housing Act's design and construction requirements...
-
III-4.1300 Unnecessary inquiries
ILLUSTRATION 1: A private summer camp requires parents to fill out a questionnaire and to submit medical documentation regarding their children's ability to participate in various camp activities...
-
1.1.8 Alternate measurement tools
Walks may be measured with instruments other than a digital inclinometer if they provide the data required for evaluation of tolerances as given in Sections 1.2.1, 1.2.2, and 1.2.3....
-
Carpet [§302.2]
The standards specify the maximum pile height (1/2” measured to the backing, cushion, or pad) and texture (level or textured loop, level cut pile, or level cut/uncut pile) and require firm...
-
§ 38.23(d)(2) Location and size
Not more than 6 inches of the required clear floor space may be accommodated for footrests under another seat provided there is a minimum of 9 inches from the floor to the lowest part of...
-
§ 37.9(b)
(b) Facility alterations begun before January 26, 1992, in a good faith effort to make a facility accessible to individuals with disabilities may be used to meet the key station requirements...
-
11B-232.2.1.3 Substitute cells
When alterations are made to specific cells, detention and correctional facility operators may satisfy their obligation to provide the required number of cells with mobility features by...
-
11B-233.3.5 Dispersion
Residential dwelling units required to provide mobility features complying with Sections 11B-809.2 through 11B-809.4 and residential dwelling units required to provide communication features...
-
1009.11 Instructions
Signage shall comply with Chapter 11A, Section 1143A or Chapter 11B, Section 11B-703.5 requirements for visual characters....
-
11B-408.1 General
Accessibility scoping requirements for elevators and lifts are located in Sections 11B-206.6 and 11B-207.6 [sic]; technical requirements are located in Sections 11B-407, 11B-408, 11B-409...
-
11B-233.3.4.1 Alterations to vacated buildings
more than 15 residential dwelling units, at least 5 percent of the residential dwelling units shall comply with Sections 11B-809.2 through 11B-809.4 and shall be on an accessible route as required...