Material: Molded Plastic Colors: 5/8" White Lettering on choice of Blue or Black background. Fastener: Self-adhesive mounting. Size: 6" x 9" Ordering: Specify product...
Search Results "VMS: Variable Message Sign"
Commonly Searched Documents
- Rockwood Manufacturing Company BFM688 BFM Series Women's ADA Toilet Room Molded Plastic Sign
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 216.8
Section 216.8 covers scoping requirements in the current ADA Standards for signs at toilet rooms and bathing rooms.
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves....
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves....
-
A4.30.8 Illumination Levels
Illumination levels on the sign surface shall be in the 100 to 300 lux range (10 to 30 footcandles) and shall be uniform over the sign surface....
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
- Mobile Phone Sensor (BE9250/BE9251)
-
Audible and Visual Indicators: ADA Standard Section 708.2
Signs indicating the meaning of visual signals should be provided....
-
Seat width and depth
The seat depth was not a primary variable of interest and was fixed at 16 inches. ...
-
Sell-outs of specific price ranges. (Section-by-Section Analysis)
For example, does the proposed regulation address the variable needs of assembly areas covered by the ADA? ...
-
QUESTION: MUST RAILROADS SUBMIT PLANS FOR MEETING THE PERFORMANCE STANDARD OF SECTION 37.42 ON A STATION-BY-STATION BASIS?
Station plans need to take these variables into account at each station....
-
Paragraph (d) Availability of auditory information (Section-by-Section Analysis)
TTY-to-TTY long distance and message unit calls from pay telephones are often not possible because an operator says how much money must be deposited....
-
707.5.2 Receipts
Where receipts are provided, speech output devices shall provide audible balance inquiry information, error messages, and all other information on the printed receipt necessary to complete...
-
11B-707.5.2 Receipts
Where receipts are provided, speech output devices shall provide audible balance inquiry information, error messages, and all other information on the printed receipt necessary to complete...
-
707.5.2 Receipts
Where receipts are provided, speech output devices shall provide audible balance inquiry information, error messages, and all other information on the printed receipt necessary to complete...
-
707.5.2 Receipts
Where receipts are provided, speech output devices shall provide audible balance inquiry information, error messages, and all other information on the printed receipt necessary to complete...
-
11B-707.5.2 Receipts
Where receipts are provided, speech output devices shall provide audible balance inquiry information, error messages, and all other information on the printed receipt necessary to complete...
- Alertus Desktop Notification
-
H1
If a sign is provided at the toilet room entrance (e.g. Men, Women, Boys, Girls, etc.), is a sign with raised characters and Braille mounted on the wall adjacent to the latch?...
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
11B-708.2 Audible and visual indicators
Signs indicating the meaning of visual signals should be provided. ◼...
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1008.1.9.7, item 5.1 at doors with delayed egress locks shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters...
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters...