Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with Section 11B-708.4....
Search Results "Transfer System"
-
11B-708.4 Residential dwelling unit communication systems
-
5.1.4 Transfer Surface Height Measurement for M301 and M302
5.1.4 Transfer Surface Height Measurement for M301 and M302 The Committee recommends capturing the transfer surface height at the highest point of the seat in an uncompressed state, inclusive...
-
Receiver Jacks: ADA Standard Section 706.2
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
Two-Way Communication Systems [§230 and §708]
Two-Way Communication Systems [§230 and §708] Where two-way communication systems are provided to gain entry to a facility or to restricted spaces, they must include visual and...
-
F219 Assistive Listening Systems
[See subsections ...]
-
219 Assistive Listening Systems
[See subsections ...]
-
§ 38.103 Public information system
[See subsections ...]
-
T211 Wheelchair Securement Systems
Wheelchair securement systems complying with the technical requirements in T603 must be provided at each wheelchair space....
-
Grab Bars
Grab Bars A grab bar must be provided on at least one side of each step and on the transfer platform (shown on page 16), or as a continuous grab bar serving each step and the platform...
- Sennheiser SK 2020-D-US Rugged Transmitter
- Sennheiser EKI 1029 Compact Multi-Channel Receiver
- Sennheiser L 2021-40 Receiver Charging Rack
- Sennheiser EK 2020-D-II-US Digital RF Body Pack Receiver
- Sennheiser SZI 1029 Infrared Emitter
- Sennheiser GZR 2020 Trolley for TourGuide Receivers and Transmitters Charging Case
-
5.1.2 Transfer Surface High Height Recommendations for M301 and M302
Therefore, transfer surfaces that are adjustable to a 25 inches maximum during patient transfer accommodate most patients who use mobility devices....
-
T603.5 Securement Systems for Rear-Facing Wheelchair Positions
Rear-facing wheelchair securement systems shall provide forward excursion barriers and padded head rests that comply with ISO 10865-1:2012(E), Wheelchair containment and occupant retention...
-
1f
Is there a horizontal grab bar on the wall alongside the shower seat (but not behind the shower seat) for stabilization and to aid in transfer from a wheelchair to the folding shower seat...
-
(4) Adjustability: Method of Measurement
used in the seated position, be taken from the floor to the top of the transfer surface (proposed M301.2.1 and M302.2.1, respectively)....
-
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302 Description: The transfer surface size standard has two components: width and depth....
-
11B-608.5.1 Transfer type shower compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1219 mm...
-
Public Address Systems
Where public address systems are provided in transportation facilities to convey public information, a means of conveying the same or equivalent information to persons who are deaf or hard...