(2) Ramp surface....
Search Results "Smooth Surface"
-
§ 38.23(c)(2) Ramp surface
-
§ 38.83(c)(2) Ramp surface
(2) Ramp surface....
-
5.2.3 Transfer Surface Measurement
5.2.3 Transfer Surface Measurement. The transfer surface should be measured from the center-point of each side of the transfer surface....
-
Tile Tech Pavers® Oceanic™ Series - Wave-Pave™
pavers can also be manufactured with various design mixes such as crushed seashells, granite chips and recycled glass which are then honed and shot blasted for a unique and slip resistant surface...
-
§ 38.125(c)(2) Ramp surface
(2) Ramp surface....
-
1005.3.2 Extended Ground or Deck Surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
-
1.2.2
1.2.2 When flatness of running slope for an accessible surface other than a ramp is measured according to Section 1.1.5 no more than 20% (rounded to the nearest whole number) of the measurements...
-
3. Review the Research Findings About Accessibility Issues for Play Surfaces
study on the accessibility of playground surfaces....
-
5.2.2.1 Transfer Surface Width Recommendations for M302
5.2.2.1 Transfer Surface Width Recommendations for M302 The Committee recommends 21 inches for the minimum width of the transfer surface of examination chairs and other equipment primarily...
-
502.4 Floor or Ground Surfaces
502.4 Floor or Ground Surfaces. Parking spaces and access aisles serving them shall comply with 302. Access aisles shall be at the same level as the parking spaces they serve....
-
Tiles
TIL was the most expensive of the five types of surfaces identified for study. ...
-
Populas Vox Two-Story Adjustable Dual Surface Workstation Demo Video
View Product Demo
-
1005.3.2 Extended Ground or Deck Surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
-
Improved Engineered Wood Fiber (EWF) Surfaces for Accessible Playgrounds Field Performance Testing: Final Report II
Improved Engineered Wood Fiber (EWF) Surfaces for Accessible Playgrounds Field Performance Testing: Final Report II Field Performance Testing March, 2002 – January, 2003 USDA...
-
10.3.1(19)
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor....
-
Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
The patented "no-bump" design makes this product ADA compliant. Features & Benefits Patented "no-bump" configuration ADA compliant Gasketed to...
-
Inpro Corporation JointMaster® 787 Series Floor Expansion Joint Covers
The integral, high durometer seal of the 787 deters water from entering the system and acts as a noise dampening device. Features & Benefits Seismic capable system...
-
Inpro Corporation JointMaster® 101 Series Floor Expansion Joint Covers
The 101 Series is adaptable to many flooring finishes, including ceramic tile, marble, stone, vinyl, tile and carpet. Features & Benefits: Dual durometer seal...
-
Inpro Corporation JointMaster® 925 Fire Barrier System Expansion Joint Systems
The 925 Fire Barrier system meets the “Hose System Test” for masonry and concrete walls. Features & Benefits Economical system for joint widths up to 3"...
-
Inpro Corporation JointMaster® 441 Series-Recessed Mount Expansion Joint
The 441 is a highly modifiable system with varying thicknesses of aluminum or stainless steel cover plates that can meet many project’s loading requirements. Features &...
-
1015.2 Where required
Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured...
-
SlabGasket Expansion Joint Replacement
Demonstration of Slabgasket Expansion Joint Replacement
-
What is an Expansion Joint Test Kit
Requires the Registered User plan or above. Login!
-
Repairing Expansion Joints - GapArmour Basics
Requires the Registered User plan or above. Login!
