5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position....
Search Results "Firm Surface"
Commonly Searched Documents
- 
    
  
  5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position
  
 - Inpro Corporation JointMaster® 316 Series Single Sightline for Carpet Floor Expansion Joint Covers
 - 
    
  
  § 38.83(b)(6) Platform surface
  
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant....
 - 
    
  
  M301.2.3.1 End Transfer Surface
  
End transfer surfaces shall be 28 inches (710 mm) wide minimum and 17 inches (430 mm) long minimum. ...
 - 
    
  
  M301.2.3.2 Side Transfer Surface
  
Side transfer surfaces shall be 28 inches (710 mm) wide minimum and 28 inches (710 mm) long minimum....
 - Populas Vox Two-Story Adjustable Dual Surface Workstation
 - 
    
  
  11B-503.4 Floor and ground surfaces
  
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
 - 
    
  
  11B-503.4 Floor and ground surfaces
  
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
 - 
    
  
  11B-812.3 Floor or ground surfaces
  
Vehicle spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle space they serve. Changes in level, slopes...
 - 
    
  
  11B-812.3 Floor or ground surfaces
  
Vehicle spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle space they serve. Changes in level, slopes...
 - 
    
  
  3. Study Findings
  
[See subsections ...]
 - 
    
  
  Components of Accessible Routes
  
[See subsections ...]
 - Ytterberg Scientific Inc. FloorPro® Floor Flatness Measurement Device
 - 
    
  
  11B-1008.2.5.3.1 Handrail gripping surfaces
  
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
 - 
    
  
  § 38.159(b)(6) Platform surface
  
(6) Platform surface. The platform surface shall be free of any protrusions of 1/4 inch (6.5 mm) high and shall be slip resistant....
 - 
    
  
  11B-1008.2.5.3.1 Handrail gripping surfaces
  
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
 - 
    
  
  11B-1008.2.5.3.1 Handrail gripping surfaces
  
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
 - 
    
  
  § 38.159(c)(2) Ramp surface
  
(2) Ramp surface....
 - 
    
  
  Clear Deck Space: ADA Standard Section 1009.2.3
  
On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat. The space shall be 36 inches (915 mm) wide minimum and shall extend forward...
 - 
    
  
  11B-1009.2.3 Clear deck space
  
On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat. The space shall be 36 inches (914 mm) wide minimum and shall extend forward...
 - 
    
  
  11B-406.5.7 Cross slope
  
The cross slope of curb ramps and blended transitions shall be 1:48 maximum.
 - 
    
  
  1013.4 Height
  
This section requires tent platforms to be 19 inches high maximum measured from the clear ground space to the tent platform surface....
 - 
    
  
  1.1.3 Walk running slope
  
primary direction of travel) by determining elevations at the ends of the walk, noticeable changes in slope, or at a maximum of 20 ft (6 m) intervals beginning at one end of the walking surface...
 - 
    
  
  1013.4 Height
  
Tent platforms shall be 19 inches (485 mm) high maximum measured from the clear ground space to the tent platform surface....