In a wheelchair accessible compartment with a door located in the side wall or partition, either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 60 inches (1524 mm) deep...
Search Results "Doors in Series"
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
-
Remove post (increase clear width at double leaf doors)
[See subsections ...]
-
I. Security
Is the security latch or bolt on the hall door mounted no higher than 48" above the floor so it is within the reach of persons who use wheelchairs and is it operable with one hand, without...
-
g-ii
Is the door hardware (e.g., lever, pull, push, panic bar) usable with one hand, without tight grasping, pinching, or twisting of the wrist, to allow people who may not be able to easily...
-
Sargent 1431 Series Aluminum Door Closer
The 1431 Series is a complete line of surface door closers for interior and exterior doors with flexibility to meet virtually every application....
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
E. Key Reach Range
If there is key card controlled door hardware on building entrances, is the key card reader positioned so persons who use wheelchairs may approach and operate the opener (48" high maximum...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
NYC Board of Elections: Video 3 - Accessibility Clerk Responsibilities
-
Allegion LCN 1460 Series Surface Mounted Door Control
Features Common to 1000 Series 1000 series closers mount three ways. Closers with regular or hold-open arm mount hinge side or top jamb....
-
Motorized Lift & Slide Door System by Panda
Product by Panda Windows & Doors - Visit www.panda-windows.com for more information!...
-
9.5.2(2)(b)
(b) sleeping space for homeless persons as provided in the scoping provisions of 9.1.2 shall include doors to the sleeping area with a minimum clear width of 32 in (815 mm) and maneuvering...
-
Visual Notification Devices
Visual Notification Devices Care must be taken that notification devices intended to signal a door knock or bell are separately wired....
-
Allegion LCN 1260 Series Surface Mounted Door Control
UL and cUL listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4, grade one. ...
-
D2
Does at least one door or one side of a double leaf-door provide at least 32 inches clear passage width when the door is open 90 degrees?...
-
Power Operation: ADA Standard Section 408.3.2.1
Section 408.3.2.1 covers the current ADA Standards for the power operation of swinging doors on limited-use/limited-application elevators.
-
How To Use the Door Closing Speed Tool
A short tutorial on how to use ETA's Door Closing Speed Tool for compliance surveys in the field. To purchase this tool, visit the Corada Shop....
-
Yale 5800 Series Cast Iron Door Closer
Yale® 5800 series cast iron door closers are ideal for commercial applications where ease of use, installation and aesthetics are required at an economical price. ...
-
Sargent 281 Series Cast Iron Door Closer
The 281 Powerglide ® line of surface door closers have been engineered to meet the demands of architects and building owners....
-
Norton Surface Mounted 5700 Series Low Energy Door Operator
The 5700 Series design is based on ease and simplicity....
