3.3.9 Toe Clearance Depth, minimum Toe clearance depths for the standards range from 150 mm (6 in.) in the U.S. to 230 mm (9 in.) in Canada (Figure 3‒9)....
Search Results "Accessibility Standard"
-
3.3.9 Toe Clearance Depth, minimum
-
Services and Facilities
In addition, all buildings, including those built before the ADA went into effect, are subject to accessibility requirements for existing facilities....
-
3.3.1 Research Data
Access Board staff to find as many studies as possible that were relevant to various accessibility standards....
-
III-4.4600 Seating in assembly areas
Public accommodations are required to remove barriers to physical access in assembly areas such as theaters, lecture halls, and conference rooms with fixed seating....
-
Knee and Toe Clearance (M303.2.4)
The Access Board is considering requiring in the final standards the dimensions for toe clearance and knee clearance recommended by the Wheeled Mobility Anthropometry Project....
-
Does the Americans with Disabilities Act (ADA) apply to the Forest Service?
However, if an agency decides to construct a facility, it must be accessible....
-
3.1 Refining MDE Definition and Committee Scope
standards....
-
11B-405.5 Clear width
[2010 ADA Standards] 405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
11B-405.5 Clear width
[2010 ADA Standards] 405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
Triggering event
Site preparation includes providing an accessible route to the element....
-
Triggering event. (Section-by-Section Analysis)
Site preparation includes providing an accessible route to the element....
-
§40.6 Records.
agency's file on each contract, grant, or loan involving the design, construction, or alteration of a residential structure shall include appropriate documentation indicating: (a) That the standards...
-
Executive Order 13132: Federalism
The 2010 Standards address federalism concerns and mitigate federalism implications, particularly the provisions that streamline the administrative process for State and local governments...
-
Doors in a Series
The Board has removed this requirement for consistency with the ANSI A117.1 standard....
-
Conference Papers and Journals
TRANSED (international bi-annual conference of professionals interested in accessibility to public transportation) 9. ...
-
Boost Your Business - Chapter 9 - Restroom Clear Space
Boost Your Business - Chapter 9 - Restroom Clear Space
-
Disability Rights Advocates 2017 Gala Video
-
E202.7 Best Meets
Where ICT conforming to one or more requirements in the Revised 508 Standards is not commercially available, the agency shall procure the ICT that best meets the Revised 508 Standards consistent...
-
Usable (Section-by-Section Analysis)
The term "usable" in the Act does not stand alone, but, rather is part of a term of art, "accessible to and usable by" persons with disabilities, which is a standard phrase in disability...
-
5.2.2.1 Transfer Surface Width Recommendations for M302
recommends 21 inches for the minimum width of the transfer surface of examination chairs and other equipment primarily used by patients in a seated position as described in its proposed standard...
-
24.1 Q. What types of grab bars should the reinforcement be designed to accommodate and what types may be used if the builder elects to install grab bars in some units at the time of construction?
In determining what is an appropriate grab bar, builders are encouraged to look to the 1986 ANSI A117.1 standard, the standard cited in the Fair Housing Act....
-
§ 36.304(d)(2)(iii)
., elements for which there are neither technical nor scoping specifications in the 1991 Standards), and therefore those elements must be modified to the extent readily achievable to comply...
