Section F202.2 addresses additions to existing facilities and provides specific criteria for accessible routes, entrances, and toilet and bathing facilities that derive from UFAS....
Search Results "Specification"
-
F202.2 Additions
-
5. Notice to Patrons
Notice to Patrons After modifications specified in Sections 3.1-3.11 have been completed at each Modified Theater, Cinemark will provide notice that wheelchair seating locations in those specific...
-
410 Platform Lifts
This section has been reformatted and changes made to the specifications for doors and gates....
-
Mirror Height
This specification was adopted to accommodate persons of short stature. The Board has included a similar requirement in the final rule....
-
802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
F216.5 Parking
In residential facilities, where parking spaces are assigned to specific residential dwelling units, identification of accessible parking spaces shall not be required....
-
§27.123(b) Complaints.
Any person who believes himself/herself or any specific class of individuals to be harmed by failure to comply with this part may, personally or through a representative, file a written...
-
Written Explanation for Refusal of Transportation
[Sec. 382.31(e)] In the situation where refusal of transportation is based on safety concerns, the written notice must include the carrier’s reasonable and specific basis for its opinion...
-
Scoping [4.1.3(20)]
Specifications in 4.34.2 and 4.34.3 were modified in June 1993 to allow either a forward or side approach and to provide further guidance on side reach heights....
-
10.3.1(6)
A minimum of one sign identifying the specific station and complying with 4.30.4 and 4.30.6 shall be provided on each platform or boarding area....
-
Drinking Fountains and Water Coolers [4.15]
Specifications in 4.15 address wheelchair access....
-
Side Approach
In June 1993, additional specifications were provided for the maximum height based on the reach depth....
-
Sales Counters [7.2(1)]
] In providing access to each "type" it is necessary to consider counters where only certain transactions can be made such as refunds for example, or counters that exclusively serve specific...
-
§ 35.151(j)(2)
requirements of paragraph (1) also apply to housing programs that are operated by public entities where design and construction of particular residential dwelling units take place only after a specific...
-
§ 37.101(e) Demand Responsive System, Vehicle Capacity of 16 or Fewer
Entities providing demand responsive transportation covered under this section are not specifically required to ensure that new vehicles with seating capacity of 16 or fewer are accessible...
-
1.1.4 Appendices
Provisions contained in the appendices of this code shall not apply unless specifically adopted by a state agency or adopted by a local enforcing agency in compliance with Health and Safety...
-
11B-233.3.2.1 Buyer identified residential dwelling units for sale
of Section 11B-233.3.2 also apply to housing programs that are operated by public entities where design and construction of particular residential dwelling units take place only after a specific...
-
1.1.4 Appendices
Provisions contained in the appendices of this code shall not apply unless specifically adopted by a state agency or adopted by a local enforcing agency in compliance with Health and Safety...
-
216.5 Parking
In residential facilities, where parking spaces are assigned to specific residential dwelling units, identification of accessible parking spaces shall not be required....
-
B. The 2010 Advance Notice of Proposed Rulemaking on Captioning and Video Description
Department published the Advance Notice of Proposed Rulemaking, Nondiscrimination on the Basis of Disability; Movie Captioning and Video Description, 75 FR 43467 (July 26, 2010) (2010 ANPRM), specifically...
-
Truncated Domes
In the final rule, the Board has revised the specification for the diameter and spacing of truncated domes to permit a range of dimensions (705.1.1)....
-
2010 ADA Standards
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
Summary
Other Hospital-Based Data Good for studying specific populations and specific problems. Many excellent studies already conducted....
-
104.1.1 Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....