The module installs and removes itself automatically from the rail system eliminating any lifting, stretching or straining by the care staff when moving and installing the lift....
Search Results "Rapid Rail"
Commonly Searched Documents
- Guldmann Ceiling Hoist GH1 F: Installation of the hoist
-
Surfaces (R302.7) (Section-by-Section Analysis)
Where pedestrian access routes cross rails at grade, the pedestrian access route must be level and flush with the top of the rail at the outer edges of the rails, and the surfaces between...
-
General: ADA Standard Section 217.1
Section 217.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for telephones.
-
11B-303.5 Warning curbs
A warning curb is not required when a guard or handrail is provided with a guide rail centered 2 inches (51 mm) minimum and 4 inches (102 mm) maximum above the surface of the walk or sidewalk...
-
1005.3.2 Extended Ground or Deck Surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
-
12162(e)(2)(A)(i) General rule
It shall be considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a responsible person to fail to make existing stations in the intercity rail...
-
R208.1 Where Required
Pedestrian at-grade rail crossings not located within a street or highway; 4....
-
A. Format and Organization
As noted previously, the formatting and organization of the 2016 Non-Rail Vehicle Guidelines differs significantly from the existing guidelines....
-
Handrail
Handrail—A narrow railing to be grasped with the hand for support....
-
§ 37.73 Purchase or lease of used non-rail vehicles by public entities operating fixed route systems
[See subsections ...]
-
§ 37.71 Purchase or lease of new non-rail vehicles by public entities operating fixed route systems
[56 FR 45621, Sept. 6, 1991, as amended at 76 FR 57936, Sept. 19, 2011]
-
Track Crossing
The proposed rule required route surfaces to be level with the rail top, but permitted a 2 ½ inch gap at the inner edge of rails to accommodate wheel flanges (1003.2.7)....
-
11B-1005.2.1.1 Dispersion
Railings, guards, or handrails required to comply with Section 11B-1005.2.1 shall be dispersed throughout the fishing pier or platform. [2010 ADAS] Advisory 1005.2.1.1 Dispersion....
-
11B-1005.2.1.1 Dispersion
Railings, guards, or handrails required to comply with Section 11B-1005.2.1 shall be dispersed throughout the fishing pier or platform. Advisory 11B-1005.2.1.1 Dispersion....
- Eliason Corporation FP-ALU5R Heavy Duty Aluminum Mid-Panel Door
-
T213.1 General
Seats on non-rail vehicles shall comply with T213....
-
T702.1 General
Signs on non-rail vehicles shall comply with T702....
-
T502.1 General
Doorways in non-rail vehicles shall comply with T502....
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
11B-217.1 General
These requirements apply to all types of public telephones including courtesy phones at airports and rail stations that provide a free direct connection to hotels, transportation services...
-
Accessible Design Benefits Everyone
With the rapid changes in the Internet and in assistive technologies used by people with disabilities to access computers, private and government organizations have worked to establish flexible...
-
NPRM
The NPRM proposed that, at new or altered platforms in intercity and commuter rail stations, rail operators would have to ensure that passengers with disabilities would be able to board...
-
DOT’s ADA Standards (2006)
DOT’s ADA Standards apply to facilities used by state and local governments to provide designated public transportation and to commuter and intercity rail stations....
-
T206.1 General
Circulation paths in non-rail vehicles shall comply with T302....