All powder rooms shall be designed to comply with Section 1134A.2, Option 2, Items 8 through 12. ...
Search Results "Patient Toilet Room"
Commonly Searched Documents
-
1134A.3 Powder rooms
- Hill-Rom Liko® M220 / M230 Mobile Lift, Senior Video
- Hill-Rom Liko® M220 / M230 Mobile Lift, Pediatric Video
-
11B-604.8 Toilet compartments
11B-604.8 Toilet compartments. Wheelchair accessible toilet compartments shall meet the requirements of Sections 11B-604.8.1 and 11B-604.8.3 _|Coat Hooks and Shelves|_....
-
Overhead Track Lifts
Overhead Track Lifts Overhead track lifts include ceiling mounted lifts and lifts mounted on a frame supported from the floor.
-
Accessible Lavatory
rooms in scoping accessible water closets (213.3.1, 213.3.2) clarifying the prohibition on accessible lavatories being placed in toilet compartments (213.3.4) removing...
-
Character Height: ADA Standard Section 703.5.5
Minimum character height shall comply with Table 703.5.5. Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further...
-
11B-703.5.5 Character height
Minimum character height shall comply with Table 11B-703.5.5. Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing...
- Gamco Recessed Multi-Roll Toilet Tissue Dispenser - TTD-6
-
4.1.6(3)(e)(i)
(i) Where it is technically infeasible to comply with 4.22 or 4.23, the installation of at least one unisex toilet/bathroom per floor, located in the same area as existing toilet facilities...
-
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers
The horizontal distance from transfer surface should be no more than 3 inches from the edge of the patient support surface....
-
5.2.1.4 Transfer Surface Size for Imaging Equipment
The transfer surface should be located such that the long dimension of 28 inches is located parallel to the patient scanning/imaging side of the table....
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADA Standards] 219.2 Required Systems....
-
Standing Supports (M304.3 and M305.3)
These kinds of adjustable supports are not required but would accommodate a broad range of patients with disabilities, particularly where a patient needs to assume multiple body positions...
-
M301.2.3 Transfer Surface Transfer Sides
The option to transfer will be required only on one long side of the patient scanning/imaging table and not at the “foot” or “head” end of such surfaces....
-
11B-612 Saunas and steam rooms
11B-612 Saunas and steam rooms....
-
5.7.1.2 Lift Compatibility Clearance in Base for Imaging Equipment (M301)
Some imaging systems already use overhead lifts to assist patients. Overhead lifts are not feasible in the MR exam room due to the magnetic fields....
-
Signage
Error/Omission: Where permanent room identification signage is provided, it is mounted in the wrong location....
-
M304.1 General
Diagnostic equipment used by patients in a standing position shall comply with M304....
- Gamco Surface Mounted Multi-Roll Toilet Tissue Dispenser - TTD-5
-
5.9 Standing Support for Equipment Used by Patients in a Standing Position
5.9 Standing Support for Equipment Used by Patients in a Standing Position....
- Construction Specialties, Inc. Barrier-resistant Doors
-
Construction Sites: ADA Standard Section 203.2
Section 203.2 covers scoping requirements of general exceptions for construction sites in the most current ADA Standards.
-
11B-604.2 Location
the side wall or partition, except that the water closet shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum from the side wall or partition in the ambulatory accessible toilet...