accessible by §38.111(a) and where the spaces required by §38.111(d) of this part are located, and at least one adjacent doorway into coach passenger compartments shall have a minimum clear...
Search Results "Clear Opening"
Filters
Commonly Searched Documents
-
§ 38.113(a)(1)
-
11B-805.2.2 Beds
A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of the beds. [2010 ADA Standards] 805.3 Clear Floor or Ground Space....
-
Landscape Forms Inc. Chase Park Trash Receptacle
Add a logo band to portray spirit and branding. 40 gallon top-opening style 36 gallon side-opening style Constructed of cast aluminum sides and door; spun aluminum top; cast iron...
-
Clear Width of Circulation Paths and Maneuvering Clearances at Wheelchair Spaces
These clearances were in addition to the requisite 30 inch by 48 inch minimum clear floor space for each wheelchair space....
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor...
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor...
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor...
-
§ 38.113(a)(2)
connecting two adjacent cars, to the maximum extent practicable in accordance with regulations issued under the Federal Railroad Safety Act of 1970 (49 CFR parts 229 and 231), shall have a clear...
-
1009.3.2 Stairway width
Stairways shall have a clear width of 48 inches (1219 mm) minimum between handrails....
-
7.2.2.1 Determining Impracticability
The use of General Exception 2 is reasonable where one or more conditions for an exemption in section 7.1 and at least one of the following limiting factors exist: Limiting Factor...
-
805.3 Clear Floor or Ground Space
A clear floor space complying with 305 shall be provided on each side of the bed. The clear floor space shall be positioned for parallel approach to the side of the bed....
-
805.3 Clear Floor or Ground Space
A clear floor space complying with 305 shall be provided on each side of the bed. The clear floor space shall be positioned for parallel approach to the side of the bed....
-
T502.4 Doorways with Steps on Over-the-Road Buses
On over-the-road buses, doorways with steps shall provide an opening with a clear width of 30 inches (760 mm) minimum. Exceptions: 1....
-
Adjusting the Hager Companies 5100 Door Closer
Learn how to adjust a Hager Companies 5100 door closer.
-
SafeZone: Cast Iron Door Closer Animation
Animation showing the internal workings of the Safezone cast iron door closer featuring pressure relief valves.
-
Corbin Russwin Inc. Cast Iron Door Closer
Requires the Registered User plan or above. Login! -
Ohio Gratings Aluminum Swaged Bar Grating Video
A brief explanation and demonstration video of Aluminum Swaged Bar Grating, manufactured by Ohio Gratings, Inc.
-
SafeZone: Norton 9500 Cast Iron Door Closer
Video providing information on the Norton 9500 Cast Iron Door Closer.
-
Ohio Gratings Informational Video
Ohio Gratings is located in Canton and produces the finest bar grating products in the world. You'll find their aluminum and steel products on bridge decks, walkways and...
-
How to Install Allegion Falcon SC71 Door Closer
This video demonstrates how to install the Falcon SC71 door closer.
-
PDQ Closer Basics
PDQ Closer Basics
-
Set Up and Adjustment of a PDQ Door Closer
-
Doors at Entrances to Businesses
However, some older doors are less than 36 inches wide and may not provide enough width (32 inch clear width when fully opened). Door openings can sometimes be enlarged....
-
11B-809.9.2 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface,...
