Lawn seating areas and exterior overflow seating areas, where fixed seats are not provided, shall connect to an accessible route. ...
Search Results "Shall"
-
11B-221.5 Lawn seating
-
1008.4.5 Transfer Supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
F206.4.7 Restricted Entrances
Where restricted entrances are provided to a building or facility, at least one restricted entrance to the building or facility shall comply with 404....
-
§27.13(a) Designation of responsible employee.
Each recipient shall designate at least one person to coordinate its efforts to comply with this part....
-
11B-1008.2.6.2 Use zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition)....
-
11B-409.4.7.2 Operable parts
The telephone and emergency signaling device shall comply with Sections 11B-309.3 _|Operable Parts; Height|_ and 11B-309.4 _|Operation|_....
-
407.3.5 Door Delay
Elevator doors shall remain fully open in response to a car call for 3 seconds minimum....
-
3.3.1 General
Site furnishings and constructed features provided in picnic units shall comply with the applicable provisions of sections 4.0 and 5.0 of the FSORAG....
-
C103.2 Undefined Terms
Any term not defined in C103.4 or in referenced standards shall be given its ordinarily accepted meaning in the sense that the context implies....
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5....
-
215.5 Residential Facilities
Where provided in residential dwelling units required to comply with 809.5, alarms shall comply with 702....
-
1133A.7, Item 3
A clear floor space shall not extend into the knee and toe space more than 19 inches (483 mm)....
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high....
-
T404.2 Vehicle Floor and Boarding Platform Coordination
The design of non-rail vehicles shall be coordinated with the boarding platforms to minimize the gap between the vehicle floor and the boarding platforms....
-
12147(b)(3) Plans and milestones
(3) Plans and milestones The Secretary shall require the appropriate public entity to develop and submit to the Secretary a plan for compliance with this subsection...
-
305.7.2 Parallel Approach
Alcoves shall be 60 inches (1525 mm) wide minimum where the depth exceeds 15 inches (380 mm)....
-
406.3 Sides of Curb Ramps
Where provided, curb ramp flares shall not be steeper than 1:10. Figure 406.3 Sides of Curb Ramps...
-
306.2.5 Width
Toe clearance shall be 30 inches (760 mm) wide minimum. Figure 306.2 Toe Clearance...
-
1134A.7, Item 3
The minimum height of water closet seats shall be 15 inches (381 mm) above the floor....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
11B-1008.2.6.2 Use zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition)....
-
F227.5 Queues and Waiting Lines
Queues and waiting lines servicing counters or check-out aisles required to comply with 904.3 or 904.4 shall comply with 403....
-
1008.4.5 Transfer Supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
11B-708.4 Residential dwelling unit communication systems
Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with Section 11B-708.4....