During construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not...
Search Results "Floor-Level Exit Sign"
Filters
Commonly Searched Documents
-
CASI Accessibility Construction Inspection Checklist
-
CALBO Accessibility Construction Inspection Checklist
During construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not...
-
1 - Design and drawing
Tolerances do not apply where a requirement states a range; for example, that grab bars must be installed between 33 inches and 36 inches above the finished floor....
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Detecto FHD Series Stationary Wheelchair Scale
This scale can only be used for top of floor installations. Please consult factory for pit type installations. 28.5 inch (72 cm) long ramp and 15 ft (4.5 m) indicator cable included....
-
AJW Architectural Products UG120-Railing UG120X-Y108 108" Exposed Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Kessel Design Linearis Super60 Trench Drain
Today's bathrooms are barrier-free, with flush-to-floor showers creating a completely new room experience....
-
American Standard Right Width 1.28-1.6 gpf FloWise Right Height Elongated Flushometer Toilet
Elongated floor mount flushometer valve toilet, top spud, with seat High Efficiency, Low Consumption operates in the range of 1.28gpf to 1.6gpf (4.8Lpf to 6.0Lpf) Right HeightTM...
-
Neo-Metro Commercial Contour Urinal 8944 Series
The rim of the urinal is recommended no more than 17" (432 mm) above finished floor. An ADA compliant flush valve must also be used. ...
-
AJW Architectural Products UG130-Railing UG130X-Y108 108" Exposed Flange, 1.5" Diameter Grab Bar, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG3-Railing UG3X-Y108 108" Concealed Snap Flange, 1.5" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Panda US-51 All Aluminum ULTRA Folding Door System
Track Options: The standard track is top hung/bottom guided and mounts directly to sub-floor to ensure the smoothest possible operation....
-
"Readily achievable.'' (Preamble, Section-by-Section Analysis)
They asserted that providing a consolidated section blurred the distinction between the level of effort required by a public accommodation under the two standards....
-
New Construction
This commenter explained that not all of its facilities offer the same programs or the same levels of medical or mental health services....
-
8.1 Excluded Populations Needing Future Attention
However, the MDE Advisory Committee did not reach consensus on a specific BMI level or levels for defining disability among individuals who are obese, especially for extreme or severe obesity...
-
Study limitations
A large number of our subjects were veterans who participated in organized sports-related events however we have found that their daily activity levels apart from the time of the event do...
-
Section 36.406(f) Assembly Areas (Section-by-Section Analysis)
Proposed § 36.406(f)(1) requires wheelchair and companion seating locations to be dispersed so that some seating is available on each level served by an accessible route. ...
-
Section 35.151(g) Assembly Areas (Section-by-Section Analysis)
Section 35.151(g)(1) would require wheelchair and companion seating locations to be dispersed so that some seating is available on each level served by an accessible route. ...
-
5. Interoperability Requirements for Assistive Technology
., make available at the underlying program level) accessibility information that facilitates use of assistive technology....
-
1. Evolving Approach to Covered Electronic Content
We proposed that “electronic content integral to the use of ICT” covered by the 255 Guidelines must conform to Level A and Level AA Success Criteria and Conformance Requirements specified...
-
Step 2: Identify the Presence of Limiting Factors
You can perform an informal survey between obvious trail slope breaks with a hand level, survey rod, and measuring chain (figure 141). You can use a digital level (figure 142)....
-
Road Roughness Measurements
The literature review found methods of measuring and recording surface profiles including the rod and level, dipstick, rolling straight-edge, profilograph (Figure 6), rolling profilers,...
-
Standards Development
The purpose of these standards is to complement minimum accessibility standards by providing the incentive of certification for achieving a higher level of accessibility and usability....
