The purpose of this guidebook is to provide support for outfitters/guides authorized, under a special-use permit from U.S. Department of Agriculture (USDA) Forest Service, to provide...
Search Results "Accessible Element"
- USDA Forest Service Accessibility Guidebook for Outfitters & Guides Operating on Public Lands
-
Title III Readily Achievable Barrier Removal
For an existing pool, removing barriers may involve installation of a fixed pool lift with independent operation by the user or other accessible means of entry that complies with the 2010...
-
902 Dining Surfaces and Work Surfaces
The Board has clarified the application of this section by revising scoping provisions for accessible dining and work surfaces, as discussed above in section 226....
-
2 - Specifications
However, many industries do not have tolerance standards or the problematic element may be part of a larger assembly for which there are no standard tolerances, the placement of a toilet...
-
Design of Shared Use Paths, Street Intersections, and Midblock Crossings
Elements of Design. 3. Cross-sectional Elements. 4. At-grade Intersection Design. 5. Design of Grade-separated Crossings. 6. Sidewalks and "Sidepath" Design Guidance....
-
Section 1194.21 Software Applications and Operating Systems (Preamble, Section-by-Section Analysis)
The NPRM required that products must provide logical navigation among interface elements through the use of keystrokes....
-
D. Captioning and Video Description Generally
Captioning and Video Description Generally Captioning makes movies shown in theaters accessible to individuals whose hearing is too limited to benefit from assistive listening devices...
- No Barriers USA
-
Swimming pools. (Section-by-Section Analysis)
entry or entries--makes this element particularly vulnerable to serial ADA litigation. ...
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND PALACE SPORTS AND ENTERTAINMENT, LLC, REGARDING THE PALACE OF AUBURN HILLS
[See subsections ...]
- Figure 404.2.4.1(k) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side with Closer – Drawing from the U.S. Access Board
- Figure 404.2.4.1(i) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side with Closer – Drawing from the U.S. Access Board
-
Section 36.103 Relationship to Other Laws (Preamble, Section-by-Section Analysis)
are necessary to make a program accessible....
-
2. General Framework of Assessment
using estimates developed by the Access Board for the Paperwork Reduction Act....
-
4.1 Introduction
Policy makers have to make a decision about who should be accommodated by knee and toe clearances or identify alternative solutions like providing side access as well as front access or...
-
C. First Advance Notice of Proposed Rulemaking (2010)
Chapter 5 covered access to electronic documents and common interactive elements found in content, and Chapter 6 addressed access to audio and visual content, as well as players of such...
-
§382.21 May carriers limit access to transportation on the basis that a passenger has a communicable disease or other medical condition?
[See subsections ...]
-
New Construction
three options: (1) Require all altered elements to be accessible, which would maintain the current policy that applies to other ADA alteration requirements; (2) permit substitute cells...
-
8. How do I determine if it is readily achievable for me to install a lift in my existing pool?
Readily achievable means that providing access is easily accomplishable without much difficulty or expense....
-
703.2.7 Character Spacing
Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum....
-
Alteration
to, remodeling, renovation, rehabilitation, reconstruction, historic restoration, resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural parts or elements...
-
703.2.7 Character Spacing
Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum. [ECTCR UFAS 4.30.4]...
-
703.2.7 Character Spacing
Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum....
-
703.2.7 Character Spacing
Characters shall be separated from raised borders and decorative elements 3/8 inch (9.5 mm) minimum....