Alternatively, a higher turning radius means that the bicyclist can maintain the same lean angle and travel around the curve at a faster speed....
Search Results "Travel"
-
Station 3-Turning Radii
-
Can People with Limited Mobility Use the Usable Circulation Path by Themselves?
People with limited mobility must be able to travel from the area of refuge to the public way, although such travel might depend on the assistance of others....
-
§382.119(b)
information includes but is not limited to the following: information concerning flight safety, procedures for takeoff and landing, flight delays, schedule or aircraft changes that affect the travel...
-
End Note
Good customer service practices that assist people with disabilities will bring repeat business from guests with disabilities, older travelers, and friends and families that accompany this...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel. Cross slope is measured the same way as slope is measured (i.e., the rise over the run)....
-
Wheelchair
A person whose disability requires use of a wheelchair or mobility device may use a wheelchair or mobility device that meets both parts of this definition anywhere foot travel is permitted...
-
1.1.3 Walk running slope
Measure for overall running slope (the primary direction of travel) by determining elevations at the ends of the walk, noticeable changes in slope, or at a maximum of 20 ft (6 m) intervals...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel. Cross slope is measured the same way as slope is measured (i.e., the rise over the run)....
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
- Symmetry Limited Use/Limited Application (LU/LA) Elevator
- indoo.rs® Indoor Navigation Solution App
-
R302.3.2 Shared Use Paths
provision at R302.3.2 that would require a pedestrian access route to be provided for the full width of a shared use path since shared use paths are typically two-directional and path users travel...
-
Road Closure Drawings
Often, foot travel is allowed beyond the restriction device. When foot travel is encouraged on the other side of the barrier, passage for someone in a wheelchair must be provided....
-
Trail Type
A category that reflects the predominant trail surface and general mode of travel accommodated by a trail....
-
Skating Skill and Performance
For example, novice skaters typically travel more slowly and have a narrower sweep width than advanced skaters.(8) Skaters choose among several different techniques to stop, often based...
-
Safety Assistants/Attendants
The Foreign Carriers NPRM proposed retaining, with minor modifications, the existing Part 382 limitations on the ability of carriers to require passengers with disabilities to travel with...
-
§382.53(b)
., offers of compensation for surrendering a reservation), individuals being paged by airlines, aircraft changes that affect the travel of persons with disabilities, and emergencies (e.g...
-
11B-216.13.1 Use of Cleaner Air Symbol
Section 11B-216.13.3, a Cleaner Air Symbol complying with Section 11B-703.7.2.5 is permitted to be posted in compliance with Section 11B-216.3 to indicate rooms, facilities, and path of travels...
-
12162(a)(4)(A)(ii)
which to eat, shall be provided to ensure that other equivalent food service is available to individuals with disabilities, including individuals who use wheelchairs, and to passengers traveling...
-
Clear Tread Width of Trails
Clear tread width is the width of traveled surface between obstacles on the ground and above the ground (figure 129). Provide at least 36 inches (915 millimeters) of clear tread width....
-
Additions [4.1.5]
Each addition to an existing building is regarded as an alteration subject to ADAAG alterations requirements (including triggering of path of travel obligations, if applicable)....
-
1016.6 Openings
Elongated openings should be placed so that the long dimension is perpendicular, or as close to perpendicular as possible, to the dominant direction of travel....