Where walls or partitions are provided, the seat shall be positioned with a wall or partition to the rear and to one side of the seat for a left-hand or right-hand approach....
Search Results "Stadium-Style Seating"
Commonly Searched Documents
-
5.3.3.2 Location Where Walls Provided
-
802.4.1 Armrests
Where armrests are provided on the seating in the immediate area, folding or retractable armrests shall be provided on the aisle side of the seat....
-
21. BRAND STANDARDS, QUALITY ASSURANCE INSPECTIONS
26, 1993 must have the required number of accessible rooms and the required number of accessible rooms with roll-in showers (ADA Standards § 9.1.2), the required number of removable tub seats...
-
§ 36.302(f)(5) Hold and release of tickets for accessible seating
(5) Hold and release of tickets for accessible seating....
-
ADA Revised Requirements: Ticket Sales
The Department of Justice published revised final regulations implementing the Americans with Disabilities Act (ADA) for title II (State and local government services) and...
-
Transfer Height
Where possible, designers are encouraged to locate the transfer device seat within 17 to 19 inches above the load and unload surface....
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices....
-
Ticket distribution methods. (Section-by-Section Analysis)
that a public accommodation shall modify its policies, practices, and procedures to ensure that individuals with disabilities can purchase single or multi-event tickets for accessible seating...
-
§ 36.302(f)(4)(iv) Maximum number of tickets patrons may purchase exceeds four
(iv) Maximum number of tickets patrons may purchase exceeds four. If patrons are allowed to purchase more than four tickets, a public accommodation shall allow patrons with...
-
Armrests (M302.3.2)
M302.3.2 would require armrests to be provided on diagnostic equipment used by patients in a seated position....
-
F221.2 Wheelchair Spaces
Wheelchair spaces complying with F221.2 shall be provided in assembly areas with fixed seating....
-
221.2 Wheelchair Spaces
Wheelchair spaces complying with 221.2 shall be provided in assembly areas with fixed seating....
-
T702 Signs
[See subsections ...]
-
221.2 Wheelchair Spaces
Wheelchair spaces complying with 221.2 shall be provided in assembly areas with fixed seating....
-
6.10
6.10 Cinemark Future Construction Theaters that are built in conformity with the seating plans for Future Construction Theaters, or with the provisions of this Consent Order for Future...
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
§ 36.302(f)(8) Prevention of fraud in purchase of tickets for accessible seating
(8) Prevention of fraud in purchase of tickets for accessible seating....
-
F206.2.8.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat....
-
§ 35.138(i)(1)
Individuals with disabilities and their companions shall be permitted to purchase the same maximum number of tickets for an event per sales transaction as other spectators seeking to purchase seats...
-
11B-802.4.2 Identification
Each designated aisle seat shall be identified by a sign or marker. [2010 ADAS] Advisory 802.4.2 Identification. ...
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. ...