Section 407.4.3 covers the current ADA Standards for the required clearance between the elevator car platform and the hoistway landing.
Search Results "Private Residence Elevator"
-
Platform to Hoistway Clearance: ADA Standard Section 407.4.3
-
11B-407.2.1.6 Keypads
ETA Editor's Note Lacking certain Exceptions allowed by 2010 ADA Standards, and imposing additional requirements regarding call buttons, the preceding CBC requirements pertaining to elevator...
-
11B-407.2.1.6 Keypads
ETA Editor's Note Lacking certain Exceptions allowed by 2010 ADA Standards, and imposing additional requirements regarding call buttons, the preceding CBC requirements pertaining to elevator...
-
§27.71(k)(5)(ii)(A) Private listening.
(A) Private listening....
-
§ 27.71(k)(5)(ii)(A) Private listening
(A) Private listening....
-
What are Public Accommodations?
Under the ADA public accommodations are private entities that own, lease, lease to or operate a place of public accommodation....
-
11B-217.4.3.2 Private buildings
Where four or more public pay telephones are provided in a private building, at least one public TTY shall be provided in the building....
-
11B-217.4.3.2 Private buildings
Where four or more public pay telephones are provided in a private building, at least one public TTY shall be provided in the building....
-
11B-240.2.2 Elevated play components
Where elevated play components are provided, at least 50 percent shall be on an accessible route and shall comply with Section 11B-1008.4....
-
11B-240.2.2 Elevated play components
Where elevated play components are provided, at least 50 percent shall be on an accessible route and shall comply with Section 11B-1008.4....
-
Limited-Use/ Limited-Application Elevators [§408]
Limited-Use/ Limited-Application Elevators [§408] LULA elevators are passenger elevators that are permitted in facilities where an accessible route between stories or mezzanines is not...
-
11B-240.2.2 Elevated play components
Where elevated play components are provided, at least 50 percent shall be on an accessible route and shall comply with Section 11B-1008.4....
-
Can audible signals for an elevator operate only when needed by a passenger who needs them through activation of dedicated “accessibility” control?
No, audible (and visible) signals required for elevators must function automatically at all times an elevator is operational....
-
4.1.3(1) ELEVATORS
Where provided, elevators shall comply with 4.10....
-
407.4.7 Designations and Indicators of Car Controls
EXCEPTION: In existing elevators, where a new car operating panel complying with 407.4.7 is provided, existing car operating panels shall not be required to comply with 407.4.7....
-
407.4.7 Designations and Indicators of Car Controls
EXCEPTION: In existing elevators, where a new car operating panel complying with 407.4.7 is provided, existing car operating panels shall not be required to comply with 407.4.7....
- Learning Disability in Higher Education... | Lexie Garrity | TEDxVanderbiltUniversity
-
1009.4.1 Standby power
The elevator shall meet the emergency operation and signaling device requirements of California Code of Regulations, Title 8, Division 1, Chapter 4, Subchapter 6, Elevator Safety Orders....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting...
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum. Top of support rails shall be 31 inches (787 mm) minimum to 33 inches (838 mm) maximum above...
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements.
-
11B-411.4.6.1 Location
Controls shall be located within one of the reach ranges specified in Section 11B-308.
-
11B-411.2.3.2 Car designation signs
Car designation signs complying with Sections 11B-703.2 and 11B-703.4.1 shall be provided on both jambs of the hoistway immediately below the floor designation. Signs shall be...
-
11B-411.4.7.4 Button spacing
Button spacing shall comply with Section 11B-407.4.7.1.5.