development and grading shall be designed to provide access to all entrances and exterior ground floor exits, and access to normal paths of travel, and where necessary to provide access, shall incorporate...
Search Results "Incorporation by Reference"
-
1127B.1
-
c) Changes
Department of Transportation (DOT) adopted by reference the revised ADAAG as regulatory standards effective November 29, 2006, and added or modified four sections....
-
T402 Ramps and Bridgeplates
revision of requirements for minimum design loads for ramps be coordinated with design loads for public lifts specified in the Federal Motor Vehicle Safety Standards (FMVSS), which are incorporated...
-
Changes
Department of Transportation (DOT) adopted by reference the revised ADAAG as regulatory standards effective November 29, 2006, and added or modified four sections....
- CCDA (California Commission on Disability Access) Accessibility Construction Inspection Checklist
-
Parking sign height measurement technique
And the 1991 Standards referred also seemed to refer to the parking surface, in a way: "Such signs shall be located so they cannot be obscured by a vehicle parked in the space."...
-
Reorganization of Chapters on Transportation Facilities and Residential Facilities
In the final rule, the provisions of these technical chapters have been incorporated into other chapters, as appropriate, for greater consistency with the rest of the document....
-
Efforts to maximize benefits
As accessibility is incorporated into new products they will be easier to use by the broadest audience possible....
-
Audible Information Systems (slide 14)
There’s technology coming out that can be incorporated in specific instances to help you navigate –3-D maps, hand-held....
-
Shower Stalls [4.21]
ADAAG does not specifically address accessibility in gang showers; a roll-in shower can be incorporated into the design by providing grab bars in a complying configuration....
-
Doors [4.35.3]
Recommendation: Additional space can be incorporated into an accessible dressing room if it is located at the end of a row....
-
Designing & Configuration Trends with Portable Chair Seating for Places of Assembly Continuing Education Course
Hussey Seating Company Credit: 1 CES HSW Credit Learning Objective: To develop a clear understanding of the design and configuration trends and market opportunities which incorporate...
-
Specific Spaces and Occupancies
and Correctional Facilities (§232) * Residential Facilities (§233) * Recreation Facilities (§234 – §243) DOJ’s 2010 ADA Standards incorporate...
-
F103 Modifications and Waivers
alteration of a facility and on each lease for a facility subject to the standards in Sec. 102-76.65(a) containing one of the following statements: (1) The standards have been or will be incorporated...
-
11B-705.3 Product Approval
Refer to CCR Title 24, Part 12, Chapter 11B, Section 12-11B.205 for building and facility access specifications for product approval for detectable warning products and directional surfaces...
-
Accessible Work Surfaces
Concern was expressed that the reference to "work surfaces" may be confused as covering surfaces that are part of a work area or station. Response....
-
DOT Memorandum - Information and Action: ADA Transition Plan Process
Memorandum Subject: INFORMATION AND ACTION: ADA Transition Plan Process Date: November 12, 2015 From: Irene Rico Acting Associate Administrator for Civil Rights In Reply Refer...
-
§ 35.171(a)(2)(ii)
Department of Justice receives a complaint for which it does not have jurisdiction under section 504 and is not the designated agency, it may exercise jurisdiction pursuant to § 35.190(e) or refer...
-
§104.33(c)(2) Transportation
If a recipient places a handicapped person or refers such person for aid, benefits, or services not operated or provided by the recipient as its means of carrying out the requirements of...
-
§ 37.165(b)(1)
(1) With respect to wheelchair/occupant combinations that are larger or heavier than those to which the design standards for vehicles and equipment of 49 CFR part 38 refer, the entity must...
-
E103.4 508 Standards (Section-by-Section Analysis)
The term “508 Standards” is defined in order to provide consistent cross-reference within the standards to all chapters that apply to Section 508-covered federal entities, namely: 508 Chapters...
-
Wheelchair Work Measurement Method
Work per meter values were also determined for the reference ramp grades and carpet/pad combinations....
-
§ 35.171(a)(2)(ii)
Department of Justice receives a complaint for which it does not have jurisdiction under section 504 and is not the designated agency, it may exercise jurisdiction pursuant to § 35.190(e) or refer...
-
§ 37.165(b)(1)
(1) With respect to wheelchair/occupant combinations that are larger or heavier than those to which the design standards for vehicles and equipment of 49 CFR part 38 refer, the entity must...