Handset cords, if provided, shall be 29 inches (735 mm) long minimum....
Search Results "Shall"
Filters
Commonly Searched Documents
-
708.3 Handsets
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
206.5 Doors, Doorways, and Gates
Doors, doorways, and gates providing user passage shall be provided in accordance with 206.5....
-
810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
604.8.1.3 Approach
Compartments shall be arranged for left-hand or right-hand approach to the water closet....
-
809.5 Residential Dwelling Units with Communication Features
Residential dwelling units required to provide communication features shall comply with 809.5....
-
405.6 Rise
The rise for any ramp run shall be 30 inches (760 mm) maximum....
-
409.4.7.3 Compartment
If the telephone or device is in a closed compartment, the compartment door hardware shall comply with 309....
-
406.3 Sides of Curb Ramps
Where provided, curb ramp flares shall not be steeper than 1:10....
-
505.7 Cross Section
Handrail gripping surfaces shall have a cross section complying with 505.7.1 or 505.7.2....
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum....
-
806.3.1 Alarms
Where emergency warning systems are provided, alarms complying with 702 shall be provided....
-
612.3 Turning Space
A turning space complying with 304 shall be provided within saunas and steam rooms....
-
203.13 Raised Boxing or Wrestling Rings
Raised boxing or wrestling rings shall not be required to comply with these requirements or to be on an accessible route....
-
706.6 Peak Clipping Level
Peak clipping shall not exceed 18 dB of clipping relative to the peaks of speech....
-
804.5 Storage
At least 50 percent of shelf space in storage facilities shall comply with 811....
-
408.2 Elevator Landings
Landings serving limited-use/limited-application elevators shall comply with 408.2....
-
1002.3 Load and Unload Areas
A turning space complying with 304.2 and 304.3 shall be provided in load and unload areas....
-
811.3 Height
Storage elements shall comply with at least one of the reach ranges specified in 308....
-
408.3.1 Sliding Doors
Sliding hoistway and car doors shall comply with 407.3.1 through 407.3.3 and 408.4.1....
-
215.2 Public and Common Use Areas
Alarms in public use areas and common use areas shall comply with 702....
-
407.4.6.2.1 Size
Buttons shall be 3/4 inch (19 mm) minimum in their smallest dimension....
-
215.4 Transient Lodging
Guest rooms required to comply with 224.4 shall provide alarms complying with 702....
-
R407.6.1 Slope
Landing slopes shall be 2 percent maximum in any direction....