Minimum maneuvering clearances at doors shall be as shown in Figures11B-26A,11B-26B and11B-26C.The floor or ground area within the required clearances shall be level and clear....
Search Results "Patient Change Area"
-
1133B.2.4.2
-
Detectable Warning Surfaces at Shared Use Path Intersections
where there is a curb ramp or blended transition; and the boundary of passenger boarding platforms at transit stops for buses and rail vehicles and at passenger boarding and alighting areas...
-
Accessible Amusement Rides
An "amusement ride" is defined by the guidelines as a system that moves people through a fixed course within a defined area for the purpose of amusement....
-
Resting Intervals [1017.8]
Resting intervals are level areas that provide an opportunity for people to stop after a steep segment and recover before continuing on....
-
Resting Intervals [1016.8]
Resting intervals are level areas that provide an opportunity for people to rest before continuing along an ORAR....
-
Viewing Scopes [1011.2, 1011.3, and 1011.8]
Viewing areas or overlooks are sometimes equipped with viewing scopes to provide visitors with a closer view of a point of interest....
-
Bathroom Do’s and Dont’s
Use a floor drain that extends the length of the shower to prevent water flowing into other areas of the bathroom....
-
More on Notice
This information is on the museum’s website, posted in the ticket purchase area and included in the museum’s brochure....
-
New Construction
Assembly Areas -- Sections 221 and 802. Sales and Service -- Sections 227 and 904. Dining and Work Surfaces -- Sections 226 and 902....
-
Utility Sinks
Usually, utility sinks are provided only in highly developed recreation areas....
-
Using the Polling Place Checklist
It is also a good idea to have a film or digital camera to document important areas that may need to be reviewed later....
-
A4.4.1 GENERAL
The touch technique is used primarily in uncontrolled areas, while the diagonal technique is used primarily in certain limited, controlled, and familiar environments....
-
A4.4.1 General
The touch technique is used primarily in uncontrolled areas, while the diagonal technique is used primarily in certain limited, controlled, and familiar environments....
-
4.1.4(7) FACTORY INDUSTRIAL
Application All areas for which the intended use will require public access or which may result in employment of physically handicapped persons....
-
PRIORITIES
§36.304(c)(2) Second, a public accommodation should take measures to provide access to those areas of a place of public accommodation where goods and services are made available to the...
-
Ticket prices. (Section-by-Section Analysis)
within a particular price range, a proportionate amount of seating (determined by the ratio of the total number of seats at that price level to the total number of seats in the assembly area...
-
1136A.1 Receptacle heights
Receptacle outlets that do not satisfy these specifications are acceptable provided that comparable receptacle outlets, that perform the same functions, are provided within the same area...
-
11B-810.5.3 Platform and vehicle floor coordination
Some vehicles are designed to be boarded from a street or the sidewalk along the street and the exception permits such boarding areas to be less than eight inches high. ◼...
-
11B-810.5.3 Platform and vehicle floor coordination
Some vehicles are designed to be boarded from a street or the sidewalk along the street and the exception permits such boarding areas to be less than eight inches high. ◼...
- Disability.gov
- Mid-Atlantic ADA Center
- The HSC Health Care System
- Advocates for Access - Peoria Heights, IL
-
Section 36.303(g)(6) Alternative Technologies
The Department has made other changes to the structure and language of this provision in response to comments and to better preserve the intent and longevity of this paragraph....