See 42 U.S.C. 12183(a)(1)....
Search Results "Enhanced 9-1-1"
-
Compliance date
-
‘‘Auxiliary aids and services.’’
The proposed definition in § 35.104 provided a list of examples of auxiliary aids and services that were taken from the definition of auxiliary aids and services in section 3(1) of the ADA...
-
CASI California Survey Reports Acceptance Criteria - Equivalent Facilitation AC 01-12
This document establishes a process for determining alternative methods of access compliance where none exist, and which can be achieved by (1) analyzing inherent benefits, advantages and...
-
Section 36.406(d) Social Service Establishments (Section-by-Section Analysis)
The deletion of section 9.5 of the 1991 Standards from the proposed standards presents two options: (1) Require coverage under the transient lodging standards, and subject such facilities...
-
Web Site Accessibility
explained that the characteristics of a covered primary Web site that markets air transportation to the general public inside the United States includes, but is not limited to, a site that: (1)...
-
ADA Business BRIEF: Communicating with Guests who are Deaf or Hard of Hearing in Hotels, Motels, and Other Places of Transient Lodging
For outgoing calls to a TTY user, simply dial 7-1-1 to reach a relay operator. ...
-
Section 35.151(e) Social Service Establishments (Section-by-Section Analysis)
The deletion of section 9.5 of the 1991 Standards from the 2004 ADAAG presented two options: (1) Require coverage under the transient lodging standards, and subject such facilities to separate...
-
Program Accessibility
For example, if there is not enough space to install a ramp with a slope no steeper than 1:12, a public entity may install a ramp with a slightly steeper slope....
-
Communicating with People Who Have Disabilities
The telecommunications relay service (TRS), reached by calling 7-1-1, is a free nationwide network that uses communications assistants (also called CAs or relay operators) to serve as intermediaries...
-
11B-404.2.9 Door and gate opening force
The force for pushing or pulling open a door or gate other than fire doors shall be as follows: 1. Interior hinged doors and gates: 5 pounds (22.2 N) maximum. 2. ...
-
11B-224.5 Dispersion
(1) Guest rooms. ...
-
Step 2: Identify the Presence of Limiting Factors
Does the combined trail running slope (grade) and cross slope exceed 1:2.5 (40 percent) for a continuous distance of 20 feet (6 meters) or more?...
-
B. Survey, Compliance and Review of Polling Place Locations
By June 1, 2017, the Third-Party Expert will review all polling place surveys from the November 2016 election and provide to the Board and the Department all of the November 2016 surveys...
-
New Accessible Handpump for Campgrounds
One recurring need has been an accessible handpump (figure 1) for potable water in Forest Service campgrounds and recreation sites. ...
-
References
Journal of Leisure Research, 12(1), 20-33. Beard, J. G., & Ragheb, M. G. (1983). Measuring leisure motivation. Journal of Leisure Research, 15(3), 219-228. Beggs, B....
-
Standards Development
However, the project team has engaged in many other standards development activities: 1. Revisions to ICC/ANSI A117 2. Development of Standards for Universal Design 3. ...
-
11B-224.5 Dispersion
(1) Guest rooms. ...
-
Compliance date. (Section-by-Section Analysis)
See 42 U.S.C. 12183(a)(1)....
-
II-7.1000 Equally effective communication
ILLUSTRATION 1: Some individuals who have difficulty communicating because of a speech impairment can be understood if individuals dealing with them merely listen carefully and take the...
-
11B-224.5 Dispersion
with the provisions of the 2010 Standards applicable to transient lodging, including, but not limited to, the requirements for transient lodging guest rooms in sections 224 and 806. 1)...
-
Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?
A1.) The consistent technical assistance on this question has been that both are subject to tolerances.
-
Tour-Mate
Our high quality, easy to use hardware and software, as well as our approach to content creation ensures that each visitor has a significantly enhanced visit experience....
-
Symmons Diav Two Handle Lavatory Faucet SLW-3512-1.5
ceramic control components 8 - 16 inch centers for mounting 20 inch braided supply hoses Aerator, 2.2 gpm flow rate (8.3 L/min) Optional lower flow rate restrictor available 1/...
-
Corbin Russwin Inc. ED4000 Series Narrow Stile Exit Device
Features Meets ANSI Grade 1 requirements Easy-to-use pushpad for quick egress and ADA compliance Low projection for barrier-free code compliance Heavy-duty...
