EXCEPTION: In unmonitored facilities where vandalism is a consideration, a fixed shower head mounted at 48 in (1220 mm) above the shower floor may be used in lieu of a hand-held shower head...
Search Results "Lavatory Clear Floor Space"
-
4.21.6 Shower Unit
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
-
4.21.6 SHOWER UNIT
EXCEPTION: In unmonitored facilities where vandalism is a consideration, a fixed shower head mounted at 48 in (1220 mm) above the shower floor may be used in lieu of a hand-held shower head...
-
11B-203.8 Residential facilities
common use areas in buildings without an elevator on upper stories are not required to comply with these regulations provided that the same common use areas are provided on the ground floor...
-
§382.67(a)
(a) As a carrier, you must ensure that there is priority space (i.e., a closet, or a row of seats where a wheelchair may be strapped using a strap kit that complies with applicable Federal...
-
4.3.2 LOCATION
(2) At least one accessible route shall connect accessible buildings, facilities, elements, and spaces that are on the same site....
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The audio output shall provide verbal instruction for the user to press the accessibility function button as a response to verbal direction in order to select the destination floor....
-
§ 38.83(c)(3) Ramp threshold
The transition from roadway or station platform and the transition from vehicle floor to the ramp or bridge plate may be vertical without edge treatment up to 1/4 inch....
-
407.2.1.1 Height
EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of the highest operable...
-
§ 38.125(c)(3) Ramp threshold
The transition from station platform to the ramp or bridge plate and the transition from car floor to the ramp or bridge plate may be vertical without edge treatment up to 1⁄4 inch....
-
§100.201a(b)(2) ICC/ANSI A117.1-1998
National Standard: Accessible and Usable Buildings and Facilities, 1998 edition, (ICC/ANSI A117.1-1998), may be obtained from the International Code Council, 500 New Jersey Avenue, NW., 6th Floor...
-
§100.201a(b)(3) CABO/ANSI A117.1-1992
National Standard: Accessible and Usable Buildings and Facilities, 1992 edition, (CABO/ANSI A117.1-1992), may be obtained from the International Code Council, 500 New Jersey Avenue, NW., 6th Floor...
-
1.9.1.2 Application
with disabilities as follows: Exception: Certain types of privately funded multistory buildings do not require installation of an elevator to provide access above and below the first floor...
-
6.1 Deliberative Process
In an effort to be consistent and establish a clear minimum, the Committee focused its subsequent deliberations on a single endpoint for the transfer surface low height recommendation....
-
3.9 Oak Ridge Tinseltown 14, 755 W. Main Street, Oak Ridge, Tennessee
Main Street, Oak Ridge, Tennessee - In Auditorium 4, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium from their current location....
-
Is there a maximum travel distance to entrances from parking and other site arrival points?
Accessible parking spaces must be located on the shortest accessible route to an accessible entrance (relative to other spaces in the parking facility)....
-
Cavity Sliders USA Inc. Wall Mount Track
Standard stocked finishes available: Clear or Bronze Anodized. Please inquire about custom colors....
-
11B-208.3.2 Residential facilities
residential dwelling units required to provide mobility features complying with Sections 11B-809.2 through 11B-809.4, and adaptable features complying with Chapter 11A, Division IV, parking spaces...
-
CASI Accessibility Construction Inspection Checklist
During construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not...
-
4.10.2 AUTOMATIC OPERATION
Each car shall be equipped with a self-leveling feature that will automatically bring the car to floor landings within a tolerance of 1/2 in (13 mm) under rated loading to zero loading conditions...
-
904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
4.10.2 Automatic Operation
Each car shall be equipped with a self-leveling feature that will automatically bring the car to floor landings within a tolerance of 1/2 in (13 mm) under rated loading to zero loading conditions...
-
4.27.3* HEIGHT
Except where the use of special equipment dictates otherwise, electrical and communications system receptacles on walls shall be mounted no less than 15 in (380 mm) above the floor....
-
11B-407.4.10.1 Location
Top of support rails shall be 31 inches (787 mm) minimum to 33 inches (838 mm) maximum above the floor of the car....