Glazing: Clear Low-E insulated is the standard. Various types of glass and other materials at a thickness of up to 1 1/8″ may be used....
Search Results "Clear Floor Area"
-
Panda UTS.60 Thermally Broken ULTRA Folding Door System
-
General: ADA Standard Section 205.1
Section 205.1 of the ADA Standards covers information on scoping requirements for operable parts in the most current ADA Standards.
-
AVAILABLE DATA DO NOT SUPPORT DEPARTING FROM THE CURRENTLY ACCEPTED STANDARD OF 19-INCH TRANSFER SURFACE HEIGHT
However, as the images below make clear, the seat reference plane and effective seat depth will dictate the difference between the seat surface height at the front edge and the height of...
-
‘‘Facility.’’ (Preamble, Section-by-Section Analysis)
Committee reports made clear that the definition of facility was drawn from the definition of facility in current Federal regulations (see, e.g., Education and Labor report at 114)....
-
Section 36.305 Alternatives to Barrier Removal (Preamble, Section-by-Section Analysis)
readily achievable to remove physical barriers to a certain section of a restaurant, the restaurant must, where it is readily achievable to do so, offer the same menu in an accessible area...
-
Standards for Individual Captioning Devices (Section-by-Section Analysis)
individual captioning devices must: (1) be adjustable so that the captions can be viewed as if they are on or near the movie screen; (2) be available to patrons in a timely manner; (3) provide clear...
-
Section 36.305 Alternatives to Barrier Removal (Section-By-Section Analysis and Response to Comments)
readily achievable to remove physical barriers to a certain section of a restaurant, the restaurant must, where it is readily achievable to do so, offer the same menu in an accessible area...
-
Facility (Section-By-Section Analysis and Response to Comments)
Committee reports made clear that the definition of facility was drawn from the definition of facility in current Federal regulations (see, e.g., Education and Labor report at 114)....
-
Section 35.138 Ticketing (Section-by-Section Analysis)
The Department received comments from advocacy groups, assembly area trade associations, public entities, and individuals....
-
Access-Able Designs Stationary Dressing Bench DST-101
Stainless steel frame holds up to 500 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.)....
-
M301.2.1 Adjustability
Transfer surfaces shall be adjustable in height measured from the floor to the top of the uncompressed transfer surface and shall provide the following: A....
-
[2010 ADAS] 105.2 Referenced Standards
ANSI American National Standards Institute 25 West 43rd Street, Fourth Floor New York, NY 10036 Standard Reference Number Title Referenced in code section...
-
M302.2.1 Adjustability
Transfer surfaces shall be adjustable in height measured from the floor to the top of the uncompressed transfer surface and shall provide the following: A....
-
Keep Good Notes
When you get back to your office you’ll want to know which one is the checklist for the first floor women’s room....
-
407.12.2.2 Obstructed Side Reach
more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches (1170 mm) high maximum and 15 inches (380 mm) high minimum above the floor...
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
§ 38.113(d)(1) Requirements
with the boarding platform or mini-high platform design such that the horizontal gap between a car at rest and the platform shall be no greater than 3 inches and the height of the car floor...
-
11B-604.7.1 Dispensers
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....
-
1133A.3 Removable base cabinets
The finish floor beneath kitchen sinks and work surfaces shall be extended to the wall....
-
11B-233.3.1.2.4 Multi-story residential dwelling units in buildings with one or more elevators
multi-story residential dwelling units shall comply with the following: The primary entry of the multi-story residential dwelling unit shall be on an accessible route on the floor...
-
1133A.3 Removable base cabinets
The finish floor beneath kitchen sinks and work surfaces shall be extended to the wall....
-
11B-604.7.1 Dispensers
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....
-
11B-809.9.3 Removable base cabinets
sinks and work surfaces provided that all of the following conditions are met: a) base cabinets can be removed without the use of specialized tools or knowledge; b) the finish floor...
