The type of latch and lock required for all doors shall be in accordance with Section 1132A.8 and Chapter 10, Section 1008....
Search Results "Local Requirement"
-
1132A.7 Type of lock or latch
-
11B-1008.4.5 Transfer supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
11B-409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by Section 11B-409.4.1....
-
206.4.1 Public Entrances
In addition to entrances required by 206.4.2 through 206.4.9, at least 60 percent of all public entrances shall comply with 404....
-
407.3.3.2 Contact
The device shall not require physical contact to be activated, although contact is permitted to occur before the door reverses....
-
227.5 Queues and Waiting Lines
Queues and waiting lines servicing counters or check-out aisles required to comply with 904.3 or 904.4 shall comply with 403....
-
804.6.5.2 Bottom-Hinged Door Ovens
Bottom-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to one side of the door....
-
1008.4.5 Transfer Supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
215.5 Residential Facilities
Where provided in residential dwelling units required to comply with 809.5, alarms shall comply with 702....
-
409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by 409.4.1....
-
§35.150 Existing Facilities
Thus, although title II may not require removal of barriers in some cases where removal would be required under title III, the program access requirement of title II should enable individuals...
-
4 Appendix B to part 36: Analysis and Commentary on the 2010 ADA Standards for Accessible Design
The 2010 Standards consist of the 2004 ADA Accessibility Guidelines (ADAAG) and the requirements contained in 28 CFR 35.151....
-
Toilet and Bathing Rooms
Section 213 of the 2010 Standards sets out the scoping requirements for toilet and bathing rooms....
-
Section 36.306 Personal Devices and Services (Preamble, Section-by-Section Analysis)
This section states that a public accommodation is not required to provide its customers, clients, or participants with personal devices, such as wheelchairs; individually prescribed devices...
-
B. Carrier-Supplied Oxygen
The Oxygen NPRM proposed to require certificated U.S. carriers operating aircraft that conduct passenger-carrying service with at least one aircraft having a designed seating capacity of...
-
§ 382.35 Attendants
(a) Except as provided in this section, a carrier shall not require that a qualified individual with a disability travel with an attendant as a condition of being provided air transportation...
-
M302.2.3 Size (Section-by-Section Analysis)
Two of the seven commenters who responded supported the proposed requirements....
-
UNREASONABLE HARDSHIP
Hardship Exception to Accessibility Requirements."...
-
SENSORY PROVISIONS
Usable with reduced or no ability to perceive / discern between colors on product Provide at least one mode that does not require user color perception....
-
Picnic Tables [1011.2 and 1011.4]
Practically speaking, this means that one space is usually required for tables up to 9 feet long. Tables between 10 and 20 feet long usually require two wheelchair spaces (figure 17)....
-
Safety
Part 382 does not require or authorize you to disregard FAA safety regulations....
-
Regulatory Process Matters
The final RIA will contain all of the information that is required in a final regulatory flexibility analysis and will serve as such an analysis....
-
Path Width
Section 4.2.1 of the ADAAG requires a minimum clear width of 0.815 m (32 inches) at a point, and 0.915 m (36 inches) continuously, for single wheelchair passage....
-
11B-604.8.1.1 Size
When deployed the baby changing tables shall not obstruct the required width of the accessible route except as allowed by Section 11B-307.2....