The disposal unit shall be located below the grab bar with the opening of the disposal unit 19 inches minimum (483 mm) above the finish floor....
Search Results "Centered Clear Floor Space"
Commonly Searched Documents
-
11B-604.7.2 Disposal units
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-407.2.2.1 Visible and audible signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. Exceptions: Reserved. Reserved....
-
2.0 Methodology
For example, the definition of a “wheelchair turning space” determines the protocol used to study the clearance needed....
-
Regulatory Process Matters
Government facilities required to provide public TTY in building with public telephone and on floor with public telephone....
-
On-Site Readers
Specific skills are needed to be an on-site reader: ability to read material well, a good clear voice, and, ideally, knowledge of the language and vocabulary used in the documents....
-
Escalators
Escalators must have a clear width of at least 32” and meet specific provisions in the ASME A17.1 Safety Code for Elevators and Escalators....
- Society for Equal Access Independent Living Center (SEA-ILC) - New Philadelphia, OH
-
Lines of Sight
Section 802.2 covers lines of sight to the screen, performance area, or playing field for persons using wheelchair spaces....
-
FIELD DATA COLLECTION PLAN
Space required for three-point turn. Lateral operating space (sweep width). Turning radii. Acceleration capabilities. Speed....
- ASI Global Partitions Stainless Steel Toilet Partitions
- Cybex Total Access Lat Pull Exercise Machine
-
711.2 Installation details
The space between the item contained in the sleeve and the sleeve itself and any space between the sleeve and the assembly penetrated shall be protected in accordance with this section....
-
ASSEMBLY AREA
A room or space accommodating fifty or more individuals for religious, recreational, educational, political, social, or amusement purposes, or for the consumption of food and drink, including...
-
F246.4 Outdoor Recreation Access Routes
At least one outdoor recreation access route complying with 1016 shall connect accessible parking spaces or other arrival points serving the viewing area with accessible elements, spaces...
-
Is there a maximum travel distance to entrances from parking and other site arrival points?
Accessible parking spaces must be located on the shortest accessible route to an accessible entrance (relative to other spaces in the parking facility)....
-
III-7.8400 Business and mercantile
The size of the store and the number of floors will be relevant factors in determining how many counters need to be accessible....
-
R310 Passenger Loading Zones (Section-by-Section Analysis)
A vehicular pull-up space 2.4 meters (8 feet) wide minimum and 6.1 meters (20 feet) long minimum must be provided at accessible passenger loading zones....
-
H. After Completing the Survey and Checklist
After Completing the Survey and Checklist Once you have completed the survey and filled out the checklist, you can determine which elements or spaces in a potential shelter facility are...
-
208.1.1
If compliance would cause the barrier removal not to be readily achievable, a facility may provide parking spaces at alternative locations for persons who have disabilities and provide appropriate...
-
4.3.2 LOCATION
(2) At least one accessible route shall connect accessible buildings, facilities, elements, and spaces that are on the same site....
- International Building Code® (IBC®)