(2) In assembly areas that are required to horizontally disperse wheelchair spaces and companion seats by section 221.2.3.1 of the 2010 Standards and that have seating encircling, in whole...
Search Results "Water Closet Clear Floor Space"
-
§ 36.406(f)(2)
- Bobrick Recessed Paper Towel Dispenser B-318
- Seton Girls ADA Braille Sign 50391
- Just Manufacturing Commercial Deck Mounted Single Control Lavatory Faucet
-
Attorney areas and witness stands. (Section-by-Section Analysis)
the courtroom and eliminating the disruption of court proceedings when individuals confront physical barriers; providing an accessible route to the witness stand and attorney area and clear...
- Halsey Taylor Bi-Level HAC Green Cooler with Hydroboost® Bottle Filler
-
§382.123(b)
(b) If a wheelchair exceeds the space provided for in §382.67 of this part while fully assembled but will fit if wheels or other components can be removed without the use of tools, you must...
-
Accessible Routes
Accessible Routes ADAAG requires that at least one accessible route connect accessible buildings, facilities, elements, and spaces on a site....
-
F246.4 Outdoor Recreation Access Routes
This section requires at least one outdoor recreation access route to connect accessible parking spaces or other site arrival points serving the viewing area with accessible elements, spaces...
-
11B-216.3 Directional and informational signs
Signs that provide direction to or information about interior spaces and facilities of the site shall comply with 703.5....
-
11B-216.3 Directional and informational signs
Signs that provide direction to or information about interior spaces and facilities of the site shall comply with 703.5....
-
11B.707.7.1.1 Vertically mounted display screen
mounted vertically or tipped away from the viewer less than 30 degrees, the center line of the display screen and other display devices shall be no more than 52 inches (1321 mm) above the floor...
-
M302.4 Lift Compatibility
, diagnostic equipment shall not be required to meet the lift compatibility requirements of this section provided that such equipment is clearly labeled as not compatible with portable floor...
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
M301.4 Lift Compatibility
, diagnostic equipment shall not be required to meet the lift compatibility requirements of this section provided that such equipment is clearly labeled as not compatible with portable floor...
-
11B-407.2.1.1 Height
[2010 ADAS] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
Protruding objects and vitrines
aprons, extend bases, or add barriers below objects and vitrines that project more than 4" from walls and have their leading edges greater than 27" and less than 80" above the finished floor...
-
§ 38.107(a)(4)
Controls for flush valves shall be mounted no more than 44 inches above the floor....
-
§ 38.123(a)(4)
Controls for flush valves shall be mounted no more than 44 inches above the floor....
- Grohe Europlus Three-hole Basin Mixer 1/2" S-Size Faucet
-
605.2 Height and Depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (430 mm) maximum above the finish floor or ground....
-
11B-407.4.10.1 Location
Top of support rails shall be 31 inches (787 mm) minimum to 33 inches (838 mm) maximum above the floor of the car....
-
605.2 Height and Depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (430 mm) maximum above the finish floor or ground....




