Spaces (Section-by-Section Analysis) Clear spaces are required at operable parts (see R403.2), including accessible pedestrian signals and pedestrian pushbuttons (see R209) and parking meters...
Search Results "Slope Meter"
-
R404 Clear Spaces (Section-by-Section Analysis)
-
R214 On-Street Parking Spaces (Section-by-Section Analysis)
R214 On-Street Parking Spaces (Section-by-Section Analysis) Where on-street parking is provided on the block perimeter and the parking is marked or metered, a minimum number of parking...
-
2.1.2.1 Summary of IEC 118‒4 (1981) Standards
This level should not go below 70 mA/meter or above 140 mA/meter....
-
21. Please indicate the typical slope the particular trail has prior to trail installation
Please indicate the typical slope the particular trail has prior to trail installation: Up to 5% Between 5% (1:20) and 8.33% (1:12) Between 8.33% (1:12) and 10% (1:10) Between 10%...
-
2.1.2.3 New York State Standards
2.1.2.3 New York State Standards Ambient electro-magnetic fields should not exceed 30 mA/meter; higher levels would preclude the installation of an IL in the particular location....
-
R214 On-Street Parking Spaces
Where on-street parking is provided on the block perimeter and the parking is marked or metered, accessible parking spaces complying with R309 shall be provided in accordance with Table...
-
Step 4: Calculate Cumulative Deviation Percentage
The drawing shows that: Deviations occur on more than 15 percent of the trail because 15 percent of 950 feet equals 142.5 feet (15 percent of 290 meters equals 43.5 meters), but...
-
Boost Your Business - Chapter 9 - Restroom Clear Space
Boost Your Business - Chapter 9 - Restroom Clear Space
-
Designing Sidewalks and Trails for Access, Part II of II: Best Practices Design Guide
Source: U.S. Department of Transportation / Beneficial Designs, Inc. Document: 484 pages (9.30 MB PDF) Publication Date: September 2001 This guidebook is the second part of...
-
R310 Passenger Loading Zones (Section-by-Section Analysis)
A vehicular pull-up space 2.4 meters (8 feet) wide minimum and 6.1 meters (20 feet) long minimum must be provided at accessible passenger loading zones....
-
Short Hikes and Interesting Features
Consider the design for a new 1-mile (1,600-meter) -long trail with a waterfall (an interesting feature) about 300 feet (91 meters) from the trailhead....
-
2.1.2.2 Additional Proposed Specifications (by Oval Window Audio)
Ambient electromagnetic noise should not exceed 25 mA/meter or –12dB ("A" weighting) re: 100 mA/meter as measured at any seat within the looped area....
-
Wheelchair Work Measurement Method
Wheelchair work per meter values for straight and turning were determined for all test course surfaces except sand, under dry conditions using the Wheelchair Work Measurement Method in accordance...
-
Parallel Parking Spaces (R309.2) (Section-by-Section Analysis)
Parallel Parking Spaces (R309.2) (Section-by-Section Analysis) Where the adjacent sidewalk or available right-of-way is more than 4.3 meters (14 feet) wide, an access aisle must be provided...
-
2.2.2.2 New York State Standards
The maximum RF signal generated by the transmitter shall not exceed 8000 uV/meter at 30 meters (which accords with the FCC regulations)....
-
R208.2 Where Not Required
Detectable warning surfaces are not required at pedestrian refuge islands that are cut-through at street level and are less than 1.8 meters (6.0 ft) in length in the direction of pedestrian...
-
3. Terminology
planar surface with characteristics dimensions that affect vehicle dynamics, ride quality, dynamic loads, and drainage, for example, longitudinal profile, transverse profile, and cross slope...
-
Picnic Tables
All new picnic table installations must comply with requirements for accessible seating spaces, table clearance, slope, and surface....
-
R402 Protruding Objects (Section-by-Section Analysis)
R402 Protruding Objects (Section-by-Section Analysis) Objects with leading edges between 685 millimeters (2.25 feet) and 2 meters (6.7 feet) above the finish surface must not protrude...
-
11B-809.9.6 Controls
Hand-operated metering faucets shall remain open for 10 seconds minimum....
-
Unified Facilities Guide Specifications
02752, Portland Cement Concrete Pavement for Roads and Site Facilities, published by the National Institute of Building Sciences, it is stated that surfaces should be tested with a 4 - meter...
-
U.S. Tape Company, Inc. Digi-Pro
Description The DIGI-PRO is a 12.5" diameter measuring wheel with a digital counter that converts your measurements into 8 different scales: Feet Feet/Inches Feet/Tenths Meters...
-
Recommended Objective Test Method and Performance Specifications
Performance Specifications The objective test method using the Rotational Penetrometer is recommended because it provides valid and reliable measurements of surface firmness and stability on slopes...
-
Pedestrian Signal Phase Timing (Section-by-Section Analysis)
Analysis) Pedestrian signal phase timing must comply with referenced MUTCD standards and use a pedestrian clearance time that is calculated based on pedestrian walking speed of 1.1 meters...
