Shelves shall be 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor or ground....
Search Results "Non-Glare Finish"
Filters
Commonly Searched Documents
-
11B-803.5 Coat hooks and shelves
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
What materials may satisfy ADAAG requirements?
These finishes, tested during the Access Board research project, yielded coefficients of friction that fell within the recommended ranges for accessible routes....
-
R402 Protruding Objects (Section-by-Section Analysis)
R402 Protruding Objects (Section-by-Section Analysis) Objects with leading edges between 685 millimeters (2.25 feet) and 2 meters (6.7 feet) above the finish surface must not protrude...
-
11B-606.2 Clear floor space
floor extends under the cabinetry; and (c) the walls behind and surrounding the cabinetry are finished. 4. ...
-
11B-606.2 Clear floor space
floor extends under the cabinetry; and (c) the walls behind and surrounding the cabinetry are finished. 4....
-
11B-606.2 Clear floor space
floor extends under the cabinetry; and (c) the walls behind and surrounding the cabinetry are finished. 4....
-
Section 2. Multistory dwelling unit
"Multistory dwelling unit" means a dwelling unit with finished living space located on one floor and the floor or floors immediately above or below it....
-
T103.4 Defined Terms
For the purpose of the Non-Rail Vehicle Guidelines, the following terms have the indicated meaning....
-
Fixed route service (or fixed route)
Operation of a non-rail vehicle along a prescribed route according to a fixed schedule....
-
§ 37.163(a)
(a) This section applies only to public entities with respect to lifts in non-rail vehicles....
-
Under what circumstances in non-employment situations, may a public entity require documentation of a disability or information about a person’s medical condition?
A public entity may make inquiries about disability when they are necessary. For example, a municipal recreation department summer camp requires parents to fill out a questionnaire...
-
May a carrier charge a maintenance or cleaning fee to passengers who travel with service animals?
However, a carrier may charge passengers with a disability if a service animal causes damage, as long as it is its regular practice to charge non-disabled passengers for similar kinds of...
-
406.1 General
Where data connections used for input and output are provided, at least one of each type of connection shall conform to industry standard non-proprietary formats....
-
11B-604.7 Dispensers and disposal units
The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars....
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
904.5.2 Tray Slides
The tops of tray slides shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground....
-
11B-904.5.2 Tray slides
The tops of tray slides shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
4.19.6* Mirrors
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) above the finish floor (see Fig. 31)....
-
11B-904.5.2 Tray slides
The tops of tray slides shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground....
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground....