Raised characters shall be 1/32ย inch (0.8 mm) minimum above their background.
Search Results "Maximum Reach Depth"
Filters
Commonly Searched Documents
-
11B-703.2.1 Depth
-
5.2.2.2 Transfer Surface Depth Recommendation for M302
5.2.2.2 Transfer Surface Depth Recommendation for M302 The Committee recommends a minimum depth requirement of 17 inches for equipment used by patients in seated positions....
-
R405.3.3 Minimum Required Depth
R405.3.3 Minimum Required Depth....
-
Types of Maximum Leave Policies
Types of Maximum Leave Policies Maximum leave policies (sometimes referred to as "no fault" leave policies) take many different forms....
-
Are the elements of path of travel and accessible routes substantively the same (such as slope, vertical clearance, width of path of travel, etc.)?
Compliance is required to the maximum extent feasible without exceeding 20 percent of the cost of the work directly associated with the installation of EVCS (see Section 11B-202.4 Exception...
-
306.3.3 Minimum Required Depth
306.3.3 Minimum Required Depth....
-
2. Analysis of footrest clearance height and depth
value for Abdomen-Footrest Distal depth)....
-
11B-802.1.3 Depth
Advisory 11B-802.1.3 Depth. Figure 11B-802.1.3 (b) depicts a single wheelchair space with side entry....
-
11B-802.1.3 Depth
Advisory 11B-802.1.3 Depth. Figure 11B-802.1.3 (b) depicts a single wheelchair space with side entry....
-
3. MINIMUMS, MAXIMUMS AND SPECIFYING AT THE LIMIT
MINIMUMS, MAXIMUMS AND SPECIFYING AT THE LIMIT: Where an element is to be installed at the minimum or maximum permitted dimension, such as "48 inches maximum", it is not good practice to...
-
1. Width and Depth of Wheelchair Spaces
For the depth of the wheelchair space, the final rule has retained both alternative depth requirements in proposed M303.2.3: 60 inches for wheelchair spaces entered from the side, and 48...
-
5.8.2.6 Clearance Depth at Toe Height Above the Ground
5.8.2.6 Clearance Depth at Toe Height Above the Ground. The toe clearance depth should be 22 inches minimum at toe height....
-
Conditions for Exceptions
[See subsections ...]
-
Conditions for Exceptions [1019]
The ABA Standards recognize the existence of constraints and limitations in the outdoor environment and allow for exceptions from specific provisions in the technical requirements...
-
1019.1 General
This section lists the conditions for the exceptions to specific provisions in 1011, 1013, 1014, 1015, 1016, 1017, and 1018. When an entity determines that any of the following...
-
ยง 35.151(k)(2) Alterations to detention and correctional facilities.
(2) Alterations to detention and correctional facilities. Alterations to jails, prisons, and other detention and correctional facilities shall comply with the 2010 Standards except...
-
Q12: Full-depth Pavement Patching
Q12: Is full-depth pavement patching considered maintenance? A12: The answer to this question depends on the scope and location of the pavement patch.ย ...
-
Brady Worldwide Reserved Parking Maximum Fine of $100 For Use By Others Sign 127470
Reserved Parking Maximum Fine of $100 For Use By Others Sign Part Number: 127470 Size: 18" H x 12" W Material Description: Aluminum...
-
Providing Appropriate Information About Accessibility
For instance, include minimum width, maximum slope, and condition of the tread surface (is it firm and stable?) on information about trails....
-
LEGAL OPINION - U.S. DEPARTMENT OF TRANSPORTATION OFFICE of GENERAL COUNSEL on 49 CFR 37.43(a)
May 2016
-
ยง 37.43(a)
(a)
-
Operable Parts: ADA Standard Section 309
Section 309 covers the current ADA Standards for reach ranges for operable parts.
