Puts wall switches within easy reach of children, wheelchair users or people with limited reach. It provides a 12" (30.5 cm) extension to any standard toggle switch. Screws and...
Search Results "Drive-Up Electric Vehicle Charging Station"
Filters
Commonly Searched Documents
-
Maddak Wall Switch Extension Handle
-
§ 37.83 Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public entities operating rapid or light rail systems
[See subsections ...]
-
§ 38.159(b)(2)(i) Requirements
The controls shall be interlocked with the vehicle brakes, transmission, or door, or shall provide other appropriate mechanisms or systems, to ensure that the vehicle cannot be moved when...
-
Location: ADA Standard Section 206.4.4.1
Section 206.4.4.1 covers scoping requirements in the most current ADA Standards for the location of entrances in transportation facilities.
-
Can platform lifts be portable or provided after construction as an adaptation?
Platform lifts can be provided after construction only to provide access to raised work stations in courtrooms (sufficient space and electrical service must be provided in design to facilitate...
-
10.3.1(16)
(16) Where provided in below grade stations, escalators shall have a minimum clear width of 32 inches....
-
T213 Seats
Comments were received from a bus manufacturer and a transit operator seeking clarification whether flip up seats used in wheelchair spaces could also be designated as priority seats....
-
T206 Handrails, Stanchions, and Handholds
The 2016 Non-Rail Vehicle Guidelines, as with the existing guidelines, require handrails, stanchions, or handholds to be provided at passenger doorways, fare collection devices (where such...
-
T203 Steps
[See subsections ...]
-
T502 Doorways
[See subsections ...]
-
T503 Illumination
[See subsections ...]
-
T205 Illumination
[See subsections ...]
-
Sec. 12145. Temporary relief where lifts are unavailable. [Section 225]
[See subsections ...]
-
§ 38.23(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchair and mobility aid users.
-
§ 38.23(d) Securement devices
(d) Securement devices—
-
§ 38.23(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.23(b)(3) Emergency operation
(3) Emergency operation. The lift shall incorporate an emergency method of deploying, lowering to ground level with a lift occupant, and raising and stowing the empty lift if the...
-
§ 38.23(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.
-
§ 38.27(b)
(b) Each securement location shall have a sign designating it as such.
-
§ 38.83(b)(4) Power or equipment failure
(4) Power or equipment failure. Lift platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or...
-
§ 38.83(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.83(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
Public transport. Fixed ramp solution for trains provides wheelchair access, Stepless by Guldmann
Stepless has developed a number of different solutions for the improvement of the accessibility within public transport. This video shows a fixed ramp solution for the city trains...
-
810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with 703.2 and shall be placed in uniform locations to the maximum extent practicable....
