Floor surfaces on aisles, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
Search Results "Aisle"
-
§ 38.59 Floor surfaces
-
§ 38.153(a)
(a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
§ 38.117(a)
(a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
4.3.5.3 180-degree turn around an obstacle
In our research, we studied the impact of keeping the depth of the turning area and the entry/egress aisle width identical....
- The Dipstick® Floor Profiler Tool
-
You must allow service animals to accompany passengers with disabilities in the cabin
You must allow the service animal to sit in close proximity to its user, as long as the service animal does not block the aisle or other emergency evacuation route in violation of FAA safety...
-
Minimum Number of Accessible Parking Spaces
Standards for Accessible Design 4.1.2(5) Total Number of Parking Spaces Provided (per lot) (Column A) Total Minimum Number of Accessible Parking Spaces (60" & 96" aisles...
-
Van Accessible Parking Spaces
The primary difference between van spaces and standard accessible spaces is an additional three feet of aisle width....
-
§ 38.79(a)
(a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
§ 38.99(a)
(a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant...
-
General: ADA Standard Section 210.1
Section 210.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for stairways.
-
6.3
6.3 Wheelchair spaces shall be integrated into their seat row and shall not be separated by any aisle or other break from the companion seat in the same row....
-
§382.63(a)
(a) As a carrier, you must ensure that aircraft with more than one aisle in which lavatories are provided shall include at least one accessible lavatory....
-
11B-812.6.3 Ambulatory
Vehicle spaces serving ambulatory EVCS shall be 120 inches (3048 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
11B-812.6.3 Ambulatory
Vehicle spaces serving ambulatory EVCS shall be 120 inches (3048 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
Seating Locations
An accessible seating plan requires aisles that are at least 36 inches wide and have sufficient turning space (e.g., a 60-inch diameter circle) in key locations throughout the room. ...
-
Problem Three
Problem Three: Accessible parking spaces or access aisles are on a sloped surface and do not provide a level area for a safe transition from the voter’s car to a wheelchair....
-
§382.61(b)
(b) You are not required to provide movable armrests on aisle seats of rows which a passenger with a mobility impairment is precluded from using by an FAA safety rule....
-
§382.97(c)(2)
(2) Internal barriers are present in the aircraft that would preclude passengers who use a boarding or aisle chair from reaching a non-exit row seat....
-
§27.72(e)(3)(ii)
(ii) Internal barriers are present in the aircraft that would preclude passengers who use a boarding or aisle chair from reaching a non-exit row seat....
-
11B-812.6.4 Drive-up
Vehicle spaces serving drive-up EVCS shall be 204 inches (5182 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
Must accessible routes or crossings be marked?
The ADA Standards require accessible parking spaces and access aisles to be marked, but they do not require accessible routes, including portions crossing vehicular ways, to be marked....
-
11B-812.6.4 Drive-up
Vehicle spaces serving drive-up EVCS shall be 204 inches (5182 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
Using the Tape Measure
A tape measure is used to measure the length, width, height, and depth of various elements including parking spaces and access aisles, routes, thresholds, doorways, and protruding objects...