Assumptions Two industry standard specifications are used to determine the safety and accessibility of each surface: ASTM F1292‒99/04 Standard Specification for Impact Attenuation of...
Search Results "ASCII: American Standard Code for Information Interexchange"
-
Assumptions
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack. [ECTCR UFAS 4.33.7]...
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
Cities and Counties: First Steps Toward Solving Common ADA Problems
New Construction and Alterations: Facilities constructed or altered after January 26, 1992, must comply with the ADA Standards for Accessible Design (ADA Standards), which are available...
-
E202.4 Functions Located in Maintenance or Monitoring Spaces (Section-by-Section Analysis)
E202.4 Functions Located in Maintenance or Monitoring Spaces (Section-by-Section Analysis) This section proposes to revise § 1194.3(f) of the existing 508 Standards to clarify that, where...
-
E.2. - Where an agency uses a best value "trade-off" source selection process, may it trade off applicable technical provisions of the Access Board’s standards where an offer provides strong technical merit, strong past performance, or a lower price?
For example, if a product is available that meets the technical provisions of the Access Board’s standards, the agency would not be required to make the purchase if significant difficulty...
-
II-6.2100 General
They can choose either the Uniform Federal Accessibility Standards (UFAS) or the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (ADAAG), which is the...
-
C.3.i. - Does Section 508 require contractors to manufacture EIT that meets the applicable Access Board’s technical provisions?
Section 508 requires the government to purchase EIT that meets the applicable technical provisions of the Access Board’s standards, with certain exceptions....
-
§ 1194.2(a)
When developing, procuring, maintaining, or using electronic and information technology, each agency shall ensure that the products comply with the applicable provisions of this part, unless...
-
National Fire Protection Association
The association delivers information and knowledge through more than 300 consensus codes and standards, research, training, education, outreach and advocacy; and by partnering with others...
-
Inclusion Solutions Freestanding Totem Pocket Display
print the content yourself Election officials pre-load content- all poll workers need to do is pop it up in seconds Ideal for How to Vote, Voter Bill of Rights, training, bilingual information...
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
E202.1 General
ICT shall be exempt from compliance with the 508 Standards to the extent specified by E202....
-
E202.1 General
ICT shall be exempt from compliance with the Revised 508 Standards to the extent specified by E202....
-
Horizontal Exits [IBC §1021 (2003), §1005.3.5 (2000)]
A horizontal exit compartmentalizes a building allowing occupants to exit the area containing the origin of a fire into another portion of the building that is protected by...
-
E202.5 Undue Burden or Fundamental Alteration (Section-by-Section Analysis)
Undue Burden or Fundamental Alteration (Section-by-Section Analysis) This section proposes to retain the provisions in existing 508 Standards §§ 1194.3(e) and 1194.2(a)(1), but would...
-
Visual Signs [ADA Standards §216.3, §216.4.2, §216.4.3]
Visual Signs [ADA Standards §216.3, §216.4.2, §216.4.3] Signs providing direction to, or information about, interior rooms and spaces must meet visual criteria in the ADA Standards, but...
-
Note Regarding Comparative Table
document and in the second column, the UFAS and/or HUD Section 504 regulation provisions that would need to be complied with because the entity could not use that section of the ADA 2010 Standards...
-
7. Definition and Coverage of Technology with “Closed Functionality”
The Advisory Committee observed that, due to technological changes since the promulgation of the existing standards and guidelines, some formerly “closed” product types were now open, while...
-
9. Broadening of Documentation Requirement for Undue Burden Exception
Section 1194.2 (a)(2) of the existing 508 Standards requires agencies to provide supporting documentation when determining that procurement of a compliant product would impose an undue burden...
-
General: ADA Standard Section 216.1
Section 216.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for signs.
-
Equal Employment Opportunity Commission
Equal Employment Opportunity Commission offers technical assistance on the ADA provisions applying to employment; also provides information on how to file ADA complaints....
-
E202.5 ICT Functions Located in Maintenance or Monitoring Spaces
only by service personnel for maintenance, repair, or occasional monitoring of equipment, such status indicators and operable parts shall not be required to conform to the Revised 508 Standards...
