If the telephone or device is in a closed compartment, the compartment door hardware shall comply with 309....
Search Results "Shall"
-
409.4.7.3 Compartment
-
C103.1 Terms Defined in Referenced Standards
Terms defined in referenced standards and not defined in C103.4 shall have the meaning as defined in the referenced standards....
-
404.3.4 Doors in Series and Gates in Series
Doors in series and gates in series shall comply with 404.2.6....
-
708.3 Handsets
Handset cords, if provided, shall be 29 inches (735 mm) long minimum....
-
4.8.5(3)
(3) The clear space between the handrail and the wall shall be 1 - 1/2 in (38 mm)....
-
11B-609.2 Cross section
Grab bars shall have a cross section complying with Section 11B-609.2.1 or 11B-609.2.2....
-
11B-411.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
11B-502.6.1 Finish and size
Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
703.7.2.1 International Symbol of Accessibility
The International Symbol of Accessibility shall comply with Figure 703.7.2.1. Figure 703.7.2.1 International Symbol of Accessibility...
-
1009.4 Elevators
In order to be considered part of an accessible means of egress, an elevator shall comply with Sections 1009.4.1 and 1009.4.2....
-
11B-206.2.12 Court sports
In court sports, at least one accessible route shall directly connect both sides of the court....
-
11B-811.3 Height
Storage elements shall comply with at least one of the reach ranges specified in Section 11B-308....
-
11B-406.5.4 Floor or ground surfaces
Floor or ground surfaces of curb ramps and blended transitions shall comply with Section 11B-405.4....
-
11B-408.3.2.2 Duration
Power-operated swinging doors shall remain open for 20 seconds minimum when activated....
-
11B-206.2.12 Court sports
In court sports, at least one accessible route shall directly connect both sides of the court. ...
-
General: ADA Standard Section 707.1
Automatic teller machines and fare machines shall comply with 707. Advisory 707.1 General....
-
11B-216.4.1 Exit doors
Signs required by Chapter 10, Section 1013.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
-
11B-213.3 Plumbing fixtures and accessories
Plumbing fixtures and accessories provided in a toilet room or bathing room required to comply with Section 11B-213.2 shall comply with Section 11B-213.3....
-
11B-705.1.2.5 Blended transitions
Detectable warnings at blended transitions shall be 36 inches (914 mm) in depth and extend the entirety of the transition separating the walk or sidewalk from the vehicular way....
-
810.5.3 Platform and Vehicle Floor Coordination
Station platforms shall be positioned to coordinate with vehicles in accordance with the applicable requirements of 36 CFR Part 1192....
-
11B-302.2 Carpet
Carpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or no cushion or pad....
-
3104.2 Separate structures
Buildings connected by pedestrian walkways or tunnels shall be considered to be separate structures. Exceptions: 1. ... 2....
-
401.1 Scope
The requirements of Chapter 4 shall apply to ICT that is hardware where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced...
-
E202.5.2 Required Documentation
The responsible agency official shall document in writing the basis for determining that conformance to requirements in the 508 Standards constitute an undue burden on the agency, or would...