Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this document....
Search Results "Local Requirement"
-
405.7 Landings
-
213.3.7 Coat Hooks and Shelves
Where coat hooks or shelves are provided in toilet compartments, at least one of each type complying with 604.8.3 shall be provided in toilet compartments required to comply with 213.3.1...
-
407.2.2.1 Visible and Audible Signals
Visible and audible signals shall not be required at each destination-oriented elevator where a visible and audible signal complying with 407.2.2 is provided indicating the elevator car...
-
217.4.7 Transportation Facilities
In transportation facilities, in addition to the requirements of 217.4.1 through 217.4.4, where at least one public pay telephone serves a particular entrance to a bus or rail facility,...
-
217.4.7 Transportation Facilities
In transportation facilities, in addition to the requirements of 217.4.1 through 217.4.4, where at least one public pay telephone serves a particular entrance to a bus or rail facility,...
-
224.6.1 Guest rooms
provided as follows: (i) Facilities that are subject to the same permit application on a common site that each have 50 or fewer guest rooms may be combined for the purposes of determining the required...
-
216.10 Assistive Listening Systems
Each assembly area required by 219 to provide assistive listening systems shall provide signs informing patrons of the availability of the assistive listening system....
-
§ 382.21 Aircraft accessibility
(a) The following requirements apply to new aircraft operated under 14 CFR part 121 and ordered by the carrier after April 5, 1990 or delivered to the carrier after April 5, 1992: (1)...
-
11B-603.2.2 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
11B-411.2.1.3 Arrangement
Hall call console arrangement of required features shall comply with Section 11B-411.2.1.3....
-
§382.57(c)(5)(i)(D)(2)
(2) Information that duplicates information available on-screen and already presented audibly is not required to be repeated; and...
-
M301.3.1 Transfer Supports
Transfer surfaces required by M301.2 shall provide transfer supports and shall comply with M305.2....
-
M307.4 Operating Force
The force required to activate operable parts shall be 5 pounds (22.2 N) maximum....
-
§382.133(a)(1)
(1) The device does not meet applicable FAA requirements for medical portable electronic device; or...
-
11B-805.4.2 Equipment
Clear space complying with Section 11B-305.2 shall be provided as required for specific equipment....
-
F244.2.3 Elements Within Camping Units with Mobility Features
Elements within camping units required to provide mobility features shall comply with F244.2.3....
-
F245.2.5 Elements Within Picnic Units with Mobility Features
Elements within picnic units required to provide mobility features shall comply with F245.2.5....
-
603.2.2 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
§382.43(a)(5)
(5) If you are a foreign carrier, you must meet this requirement by May 13, 2010....
-
11B-203.1 General
Sites, buildings, facilities, and elements are exempt from these requirements to the extent specified by 11B-203....
-
12114(c)(5)
(5) may, with respect to Federal regulations regarding alcohol and the illegal use of drugs, require that --...
-
904.1 General
Check-out aisles and sales and service counters shall comply with the applicable requirements of 904....
-
§ 1194.3(e)
(e) This part shall not be construed to require a fundamental alteration in the nature of a product or its components....
-
§ 1194.22(d)
(d) Documents shall be organized so they are readable without requiring an associated style sheet....